Sophomore Rider
Currently Offline
Posts: 247
Likes: 2
Joined: Feb 24, 2013 5:04:18 GMT -5
|
Post by gatekeeper on Sept 3, 2013 4:24:17 GMT -5
If your charging system is healthy it should run around 13 volts DC at idle to 14.5 volts DC when the RPM's are up.
|
|
Sophomore Rider
Currently Offline
Posts: 247
Likes: 2
Joined: Feb 24, 2013 5:04:18 GMT -5
|
Post by gatekeeper on Aug 27, 2013 6:12:12 GMT -5
Woo Whoo!! Thanks!! ;o
|
|
Sophomore Rider
Currently Offline
Posts: 247
Likes: 2
Joined: Feb 24, 2013 5:04:18 GMT -5
|
Post by gatekeeper on Aug 27, 2013 5:30:07 GMT -5
PM sent.
|
|
Sophomore Rider
Currently Offline
Posts: 247
Likes: 2
Joined: Feb 24, 2013 5:04:18 GMT -5
|
Post by gatekeeper on Aug 27, 2013 5:29:11 GMT -5
PM sent.
|
|
Sophomore Rider
Currently Offline
Posts: 247
Likes: 2
Joined: Feb 24, 2013 5:04:18 GMT -5
|
Post by gatekeeper on Aug 24, 2013 12:02:22 GMT -5
Welcome to the great Pacific Northwest! Enjoy your stay. ((*
|
|
Sophomore Rider
Currently Offline
Posts: 247
Likes: 2
Joined: Feb 24, 2013 5:04:18 GMT -5
|
Post by gatekeeper on Aug 19, 2013 5:18:30 GMT -5
If you are going to be doing any two up riding at all go with the Roketa. I have one of the MC-13-250's and it is a good running, comfortable machine.
|
|
Sophomore Rider
Currently Offline
Posts: 247
Likes: 2
Joined: Feb 24, 2013 5:04:18 GMT -5
|
Post by gatekeeper on Aug 14, 2013 20:30:18 GMT -5
I don't know what model Honda scooter you have but I believe my Spree takes 8mm mirrors.
|
|
Sophomore Rider
Currently Offline
Posts: 247
Likes: 2
Joined: Feb 24, 2013 5:04:18 GMT -5
|
Post by gatekeeper on Aug 10, 2013 13:38:31 GMT -5
Sounds like your variator nut may have loosened up.
|
|
Sophomore Rider
Currently Offline
Posts: 247
Likes: 2
Joined: Feb 24, 2013 5:04:18 GMT -5
|
Post by gatekeeper on Aug 6, 2013 4:57:48 GMT -5
Those measurements should be in INCHES, not mm. |
|
Sophomore Rider
Currently Offline
Posts: 247
Likes: 2
Joined: Feb 24, 2013 5:04:18 GMT -5
|
Post by gatekeeper on Aug 4, 2013 9:30:04 GMT -5
Not really a 2 stroke guy but that doesn't sound valid to me. If it was the case wouldn't you be able to richen it up with the mixture screw?
|
|
Sophomore Rider
Currently Offline
Posts: 247
Likes: 2
Joined: Feb 24, 2013 5:04:18 GMT -5
|
Post by gatekeeper on Aug 3, 2013 6:32:04 GMT -5
Sounds like your petcock has failed and is allowing gas to come down the vacuum line into your intake manifold.
|
|
Sophomore Rider
Currently Offline
Posts: 247
Likes: 2
Joined: Feb 24, 2013 5:04:18 GMT -5
|
Post by gatekeeper on Jul 30, 2013 15:01:30 GMT -5
Try putting a wrench on the variator nut and apply slight pressure in the clockwise direction to see if you can take pressure off the bendix gear. Then maybe you can push it back in place.
If that doesn't work then you will need to take the variator nut off and remove the outer variator face. (has the gear teeth on it)
Regardless you should replace the bendix with a new one.
|
|
Sophomore Rider
Currently Offline
Posts: 247
Likes: 2
Joined: Feb 24, 2013 5:04:18 GMT -5
|
Post by gatekeeper on Jul 29, 2013 4:19:31 GMT -5
|
|
Sophomore Rider
Currently Offline
Posts: 247
Likes: 2
Joined: Feb 24, 2013 5:04:18 GMT -5
|
Post by gatekeeper on Jul 21, 2013 13:31:25 GMT -5
|
|
Sophomore Rider
Currently Offline
Posts: 247
Likes: 2
Joined: Feb 24, 2013 5:04:18 GMT -5
|
Post by gatekeeper on Jul 16, 2013 4:12:49 GMT -5
|
|
