|
|
Post by sailracer on Jul 21, 2013 13:03:29 GMT -5
OK, Who's got a good trick for compressing the valves on an 83cc head? I tried with a clamp, and a peice of steel with a hollow in it so i can put on the retainers, but it keeps slipping. I need another hand!! Who's got a trick to share?
|
|
|
|
Post by ramblinman on Jul 21, 2013 13:22:00 GMT -5
i've seen an easier way with a deep socket but can't find the vid. i'll post if i see it again.
i've never done it before so idk if this is helpful or not, good luck.
|
|
Sophomore Rider
Currently Offline
Posts: 247
Likes: 2
Joined: Feb 24, 2013 5:04:18 GMT -5
|
Post by gatekeeper on Jul 21, 2013 13:31:25 GMT -5
|
|
|
|
Post by ramblinman on Jul 21, 2013 13:33:35 GMT -5
that's it!  |
|
|
|
Post by sailracer on Jul 21, 2013 13:49:42 GMT -5
Thanks guys I posted the response in the wrong thread  |
|
|
|
Post by rockynv on Jul 23, 2013 11:02:16 GMT -5
I have had the tool for years so it hasn't been a problem. Most auto parts stores have loaners that you can use for free if you shop there.
|
|
jet
