|
|
Post by devo344a on Jul 29, 2013 10:35:22 GMT -5
I understand the atv was old and I really didnt need to see it I just pulled the top off and looked.
yea A translucant one would be nice on my scoot you cant see the glass and the fluid went down a hair and I started loosing front brakes and it was just at the bottom of the resivor they must only put in enough to make the brakes work and thats all
|
|
|
|
Post by devo344a on Jul 29, 2013 8:38:27 GMT -5
I bought a atv and the sight glass was broken out I took I think a penny and jb weld glued the penny in and had no more trouble
|
|
|
|
Post by devo344a on Jul 29, 2013 8:04:35 GMT -5
The 64mm and 69mm valves are the height not the valve size you would know if you have the wrong rockers there is a good deal of differancs
|
|
|
|
Post by devo344a on Jul 27, 2013 16:01:34 GMT -5
I didnt drill mine I ground the weld off the exaust tip end and it came off like a cap I then cut the muffler off leaving about 8in where the pipe comes into the muffler I drilled 3--3/16 holes I then ground around the muffler where I cut it off and then welded the cap back on it worked great alot more take off power and better top end
|
|
|
|
Post by devo344a on Jul 27, 2013 13:03:46 GMT -5
The only differance in a 64mm and a 69mm is the height I madj mine at .002 any looser and it clacks to much
|
|
|
|
Post by devo344a on Jul 25, 2013 10:40:50 GMT -5
Neet
|
|
|
|
Tablet
by: devo344a - Jul 25, 2013 10:31:57 GMT -5
Post by devo344a on Jul 25, 2013 10:31:57 GMT -5
Here is the one im thinking of getting 7" .TAB Nero x2 Dual Core Android 4.1 Multi-Touch Tablet PC (Black) by Matricom 4.7 out of 5 stars (9) $149.00$  .00 In Stock.Offered by USA Wholesale Suppliers Only 11 left in stock--order soon. 1 Used & New from $ .00 Move to another list Added Jul Its on amazon and after looking and reading and going threw reviews I guess its ok Im going to serf the web,movies, Games, Shop on it just going to be easyer than the laptop |
|
|
|
Post by devo344a on Jul 25, 2013 8:55:39 GMT -5
I put mine in a ziplock and keep them in a tote
|
|
|
|
Tablet
by: devo344a - Jul 24, 2013 22:42:51 GMT -5
Post by devo344a on Jul 24, 2013 22:42:51 GMT -5
Just wondering if any of yaall have one and how good they workIve been looking for under $100 bucks Ive been doing some resurce on them and found a few I like and might get Have till the 2nd of the month when I get paid to figgure one out to buy
1Ireally like so far I havnt been feeling very good the last few weeks and getting to the point I may have to go to the hospital for awhile and want something to do while in there I believe the smaller design would probably be better than my lap top Any Info on them would be great
Thanks Tim
|
|
|
|
Post by devo344a on Jul 24, 2013 22:32:23 GMT -5
Redroush I feel the same as you the speed limit here in town is 35 at the highest I go get cigeretts and it20 miles away on a back road its 55 on it
Thats why I put the 80ccBBK on mine makes pulling out into traffic alot easyer when I go the back road I run approx 45to 50 on it
I dont have any ins,regestration nothing on it and just putting the 80cc BBK made a world of differance and the way the speed limit is I dont need any more power than I got it gets up and gos when needed
|
|
|
|
Post by devo344a on Jul 24, 2013 12:02:48 GMT -5
The best way Ive found is use a chalk mark.
Put a chalk mark across the tire tread take it a ride around the block see how the mark is if it only wore the chalk off the center it has to much pressure keep letting the air out and chalking the tire till you just have the chalk mark across the tire wearing off all the way off across the tire evenly
|
|
|
|
Post by devo344a on Jul 24, 2013 11:56:15 GMT -5
Might need the valves adjusted
|
|
|
|
Post by devo344a on Jul 24, 2013 8:29:00 GMT -5
On chinesepartswholesale.com they have quite a few LED blinkers Im going to get me some for my scoot
|
|
|
|
Post by devo344a on Jul 21, 2013 12:43:43 GMT -5
I use the screw driver and socket method put the screwdriver in the teeth of the starter and starter gear on the variator it comes off fairly easy
|
|
|
|
Post by devo344a on Jul 19, 2013 23:02:19 GMT -5
When you didnt have the coil bolted down it didnt have a ground and it being the higher voltage one makes it worse it will shoot all the voltage back threw the wiring and blow out the CDI.
|
|
.00