|
|
Post by devo344a on May 26, 2014 0:57:49 GMT -5
My 3 chains broke while driving the chain didn't make any noise while running high or low rpm. Mine was on the same bbk like I said it has to have the thin head gasket and the jug gasket I removed and used silicone it gave me the clearance needed I've been running it for a year now and no problemno leaks and I run it ala lot here its extremely hot and no problem with it
|
|
|
|
Post by devo344a on May 20, 2014 9:08:26 GMT -5
If its to tight to push down with a screwdriver threw the tensioner hole mine was so tight I could not move it more than 1/4 inch. When I put the metal gasket back on it gave me the slack I needed the only other way is take out the base gasket and use silicone it will give you a little more
|
|
|
|
Post by devo344a on May 12, 2014 8:24:34 GMT -5
If you put it together with the wrong gasket it will break again use a steel gasket if thats what it came with I broke 3 before I found this out after 3 complete teardowns to put a new chain on I was ready to junk it.
If your not sure when you put it back together get the head and cam bolted down and with the tensioner out take a screw driver and see how tight the chain is mine was like a banjo string I could bairly move it I even tryed not useing the tensioner Ithought it would strech some then i would put the tensioner back on and it still broke the only fix was the thin metal gasket
|
|
|
|
Post by devo344a on May 6, 2014 10:25:38 GMT -5
I had the same problem it drove me nuts and if its breaking chains after a BBK its the head gasket if it had a metal gasket you have to put a metal gasket back on it or it tightens the chain to tight and breaks it the differance in the regular gasket and the metal one is enough to tighten the chain to much I even took the tensioner out and the chain is way to tight.
there isnt a better chain to buy for it I tryed everything and I broke 3 before i found out what it was and split the case 3 times to install it
|
|
|
|
Post by devo344a on Mar 17, 2014 22:34:38 GMT -5
I use flipflops instead of bear feet and a tee shirt and shorts it makes
|
|
|
|
Post by devo344a on Mar 17, 2014 22:34:27 GMT -5
I use flipflops instead of bear feet and a tee shirt and shorts it makes
|
|
|
|
Post by devo344a on Jan 30, 2014 12:43:43 GMT -5
Ive been using it for 2 years and no problem yet
|
|
|
|
deer
by: devo344a - Dec 18, 2013 19:07:38 GMT -5
Post by devo344a on Dec 18, 2013 19:07:38 GMT -5
when I was back that way in rayland oh I had 10 acres and I would feed them with corn they got so tame it wasnt funny i could shake the corn in the bucket and they would about run me over some would even eat out of the bucket i used them for bait when the does came in season they brought in big bucks. I had alot of fun feeding them and even named them I fed them for about 9 years
|
|
|
|
Post by devo344a on Nov 27, 2013 13:11:47 GMT -5
|
|
|
|
Post by devo344a on Nov 22, 2013 14:29:23 GMT -5
I was 3 years old but still remember seeing it on tv and my mom crying
|
|
|
|
Post by devo344a on Nov 21, 2013 8:26:33 GMT -5
Cable and padlock
|
|
|
|
Post by devo344a on Nov 20, 2013 10:49:05 GMT -5
Use a fire ext
|
|
|
|
Starter
by: devo344a - Oct 30, 2013 8:02:39 GMT -5
Post by devo344a on Oct 30, 2013 8:02:39 GMT -5
My neighbor has a 2002 jet moto 150 and when he pulles on the brake the starter spins everytime when he sits at a light with the brake on it spins. Any one have this problem yet? dont know quite where to start on this one. Any Ideas?  |
|
|
|
Post by devo344a on Oct 24, 2013 18:06:25 GMT -5
Glad your allright sucks it happend
|
|
|
|
Post by devo344a on Oct 23, 2013 9:09:31 GMT -5
Try putting it on a high charge for a few minutes and see what happens Ive had a few come back
|
|
