Sophomore Rider
Currently Offline
Posts: 174
Likes: 1
Joined: Mar 17, 2013 11:51:20 GMT -5
|
Post by indymoped on Apr 13, 2013 12:10:45 GMT -5
Well that is true...2 are ground..I suppose you could make it work...but you would need to buy the plugs for it to fit the 4T. The company makes one for 4T also...and of course being 4T the parts are a bit cheaper than 2T....which still I don't understand  Maybe the amount that the timing is advanced differs from a 2 stroke to a 4 stroke. And I'd guess that they sell a lot more 4 stroke CDI's than 2 stroke so to offset the cost of R&D for the 2 stroke CDI's they charge more. Thats probably the case with most 2 stroke parts and why they cost more. |
|
Sophomore Rider
Currently Offline
Posts: 174
Likes: 1
Joined: Mar 17, 2013 11:51:20 GMT -5
|
Post by indymoped on Apr 12, 2013 21:18:11 GMT -5
Actually that CDI will work on a 2 stroke or a 4 stroke. The spark plug is fired on the compression stroke and on the exhaust stroke.
|
|
Sophomore Rider
Currently Offline
Posts: 174
Likes: 1
Joined: Mar 17, 2013 11:51:20 GMT -5
|
Post by indymoped on Apr 11, 2013 21:15:05 GMT -5
I can't see anything except text and the word image in brackets.
|
|
Sophomore Rider
Currently Offline
Posts: 174
Likes: 1
Joined: Mar 17, 2013 11:51:20 GMT -5
|
Post by indymoped on Apr 11, 2013 21:11:04 GMT -5
|
|
Sophomore Rider
Currently Offline
Posts: 174
Likes: 1
Joined: Mar 17, 2013 11:51:20 GMT -5
|
Post by indymoped on Apr 11, 2013 20:39:10 GMT -5
Not trying to put down your machinist skills but i think you should consider buying an  jet. Its like 3 or 4 bucks at the most. Also maybe check your spark plug gap if you haven't. The other thing is that if it was sitting for a while you need to drain all your gas out and put fresh gas in it. |
|
Sophomore Rider
Currently Offline
Posts: 174
Likes: 1
Joined: Mar 17, 2013 11:51:20 GMT -5
|
Post by indymoped on Apr 11, 2013 20:13:25 GMT -5
|
|
Sophomore Rider
Currently Offline
Posts: 174
Likes: 1
Joined: Mar 17, 2013 11:51:20 GMT -5
|
Post by indymoped on Apr 11, 2013 11:26:34 GMT -5
Parting out a 150cc Alien Moped. It had a Longbo Engine I pulled the motor off for a custom project. But everything else is there. Message me if you are interested in anything. I accept paypal. Will ship. Buyer pays shipping cost.  |
|
Sophomore Rider
Currently Offline
Posts: 174
Likes: 1
Joined: Mar 17, 2013 11:51:20 GMT -5
|
Post by indymoped on Apr 9, 2013 11:34:02 GMT -5
Unless you are getting a misfire or power loss your stock coil should be fine.
|
|
Sophomore Rider
Currently Offline
Posts: 174
Likes: 1
Joined: Mar 17, 2013 11:51:20 GMT -5
|
Post by indymoped on Apr 8, 2013 19:03:34 GMT -5
has anyone else installed the CDI from Progress Racing that carasdad has a link to? What results did you see
|
|
Sophomore Rider
Currently Offline
Posts: 174
Likes: 1
Joined: Mar 17, 2013 11:51:20 GMT -5
|
Post by indymoped on Apr 8, 2013 12:31:06 GMT -5
Well now it has been done. 150cc Longbo Engine on 49cc peace motorsports frame. Ill have a video of it once i get the shock mounts welded up, plastics on, and the throttle cable hooked up.  |
|
Sophomore Rider
Currently Offline
Posts: 174
Likes: 1
Joined: Mar 17, 2013 11:51:20 GMT -5
|
Post by indymoped on Apr 8, 2013 12:19:34 GMT -5
I would never patch a front tire even if it was in the tread of the tire. Cuz if for any reason the patch job fails and the tire does. You'll go down with it. Its like 40 bucks at the most for a new one.
|
|
Sophomore Rider
Currently Offline
Posts: 174
Likes: 1
Joined: Mar 17, 2013 11:51:20 GMT -5
|
Post by indymoped on Apr 8, 2013 12:02:23 GMT -5
Does anybody know of a performance cdi that actually does anything besides remove the rev limiter?
I have been looking into possibly getting an NCY one.
does anyone know if they make quality parts
|
|
Sophomore Rider
Currently Offline
Posts: 174
Likes: 1
Joined: Mar 17, 2013 11:51:20 GMT -5
|
Post by indymoped on Apr 6, 2013 21:56:13 GMT -5
f your compression didnt raise much by squirting oil in the cylinder it is most likely nothing to do with the rings sealing its probably your valves leaking a little bit.
|
|
Sophomore Rider
Currently Offline
Posts: 174
Likes: 1
Joined: Mar 17, 2013 11:51:20 GMT -5
|
Post by indymoped on Apr 5, 2013 21:06:11 GMT -5
Just so you all know your not actually doing 50+mph on a 49cc scooter with few mods on it. Your speedometers are all fast by about 5 to 10 mph from the factory.
|
|
Sophomore Rider
Currently Offline
Posts: 174
Likes: 1
Joined: Mar 17, 2013 11:51:20 GMT -5
|
Post by indymoped on Apr 5, 2013 21:00:08 GMT -5
Royal Purple Haha what a joke.All they do is charge you twice the price of regular synthetic oil for oil that's dyed purple.
Changing from conventional to synthetic may give you a tiny bit more power but almost nothing noticeable. But royal purple giving you more power vs. a different synthetic oil is a joke. Anything you notice is just in your head.
|
|
jet. Its like 3 or 4 bucks at the most. Also maybe check your spark plug gap if you haven't. The other thing is that if it was sitting for a while you need to drain all your gas out and put fresh gas in it.