|
|
Post by jerseyboy on May 26, 2017 20:17:13 GMT -5
Dont mod your scooter,thats about as funny as it gets.Only reason I bought it was to mod the living heck outta it!!!
Mine runs like an ape!!!! On its 5th season!!!! 6700km and going stronger than ever!!
|
|
|
|
Post by jerseyboy on Sept 17, 2016 19:38:13 GMT -5
That is the float bowl drain hose plug,its supposed to stay tight unless you want to drain the carb bowl for storage or repair...Im assuming you need to take the carb out and do a full cleaning on all the ports and jets.Sounds like another case of the ethanol blues to me  |
|
|
|
Post by jerseyboy on Sept 16, 2016 20:34:52 GMT -5
I would jump the solenoid and see if it turns over..might have a bad starter or stuck or bad solenoid.
You getting 12v to the starter and also check for 12v to solenoid with starter button pushed,,check for continuity on starter button also....just a few things for you to check.
Good luck!
|
|
|
|
Post by jerseyboy on Sept 16, 2016 20:31:48 GMT -5
Its always a good idea to put a little coating of locktite around the seal shoulder so it cant leak in that spot.
Nice step by step bro!
577
|
|
|
|
Post by jerseyboy on Feb 9, 2016 7:49:09 GMT -5
Nope. No snow. In fact, it's 89 degrees right now with powder blue skies. Lot of good it does me though. Rotator cuff surgery 4 days ago; arm in a sling for a month. Difficult to ride (and illegal, but who is counting that ...) with a sling on. You and your perfect weather !! , jersey boy prob got hit with some snow. Hope u heal up soon rcq. We got 31 inches..supposed to get 4 today..February is my favorite month...NOT!!! Hope you guys are all doing well,,God Bless to all you scooter guys and gals!! jersey |
|
|
|
Post by jerseyboy on Feb 8, 2016 13:48:28 GMT -5
Getting this thing dialed in. Running 12gr Dr. Pepper sliders with the ultra low ratio gear set and GEH's full-NCY clutch. If the engine is punched it will climb into the mid 7K range (~7,500 or so) .... but at 1/3 or so throttle it cruises along nicely at 55-60mph, the tach at 6,500 to 7K. For me, that is just about where i want things. Thats exactly how mine runs but less than half the price..lol..glad your getting it tuned in there,,ready for Spring!!! |
|
|
|
Post by jerseyboy on Dec 2, 2015 13:23:03 GMT -5
I cant believe your scooter is still alive after all you put it through on those bad roads down there...lol Good thing for the forum and cheap parts |
|
|
|
Post by jerseyboy on Dec 2, 2015 13:21:51 GMT -5
I run regular when I forget and it runs fine.
|
|
|
|
Post by jerseyboy on Nov 5, 2015 21:05:07 GMT -5
My HF flux wire welder would do a good job on that hanger,,you should invest in one,they have them for $100 most of the time and are worth every penny!
Keep safe out there guys!!
|
|
|
|
Post by jerseyboy on Nov 3, 2015 9:11:51 GMT -5
I had some of my best times on the old mcculloch powered karts(1978),,man just the sound of them was evil.We had to use a steel cable on one of them to start it,,the rope kept breaking from so much compression..half the job was getting it started,,once it was running you ran it out of castor fuel |
|
|
|
Post by jerseyboy on Oct 28, 2015 11:48:04 GMT -5
Thanks for the awesome info brother!!
|
|
|
|
Post by jerseyboy on Oct 27, 2015 6:47:55 GMT -5
Nice addition for longevity,,I have been starting my 60mm BBK for a while now with no problems on stock stuff,,the battery is 3 years old BTW-I could not find a video here  |
|
|
|
Post by jerseyboy on Oct 20, 2015 17:23:44 GMT -5
Wow,,totally awesome guys!!!!!
Hey Vader,can you post a link to the YT video you made,I would love to see it?
Thanks!!
|
|
|
|
Post by jerseyboy on Oct 19, 2015 7:07:55 GMT -5
1/2 throttle for 300 miles lmao...
|
|
|
|
Post by jerseyboy on Oct 16, 2015 16:14:18 GMT -5
My dad was friends with him when I was a little fella,I would listen and learn as much as I could....Bob is a legend.
We always broke our motors in really hard and they ran better and lasted longer than the rest.
A little top end additive never hurts in a 4 stroke....walmart has lucas for $4 a bottle I use it in all my motors.
|
|
