|
weather
by: devo344a - Mar 23, 2013 16:28:00 GMT -5
Post by devo344a on Mar 23, 2013 16:28:00 GMT -5
Its windy gusts to over 50mph it sucks suppose to be windy the next 3 days
|
|
|
Post by devo344a on Mar 23, 2013 10:25:02 GMT -5
Where can you get good prices on steel stroker cranks for the 49cc 139qmbs at i havnt found a place
|
|
|
Post by devo344a on Mar 23, 2013 10:21:33 GMT -5
I lived in FL around miami and years ago you didnt have to have insurance only the tag they figgured you were going to get the worst of the deal if you wrecked
|
|
|
New Mexico
by: devo344a - Mar 22, 2013 9:30:48 GMT -5
Post by devo344a on Mar 22, 2013 9:30:48 GMT -5
In NM in Deming
|
|
|
Post by devo344a on Mar 22, 2013 8:37:35 GMT -5
was wondering how the laws on scooters were in different states. Here in NewMexico there really arnt any you dont have to have a tag,insurance,nothing the dmv told me as long as its 49cc and under treat it like a bycycle the 49cc and above have to reg,insurance,tag the whole works.also the 49cc must not go above 35mph or it has to be regestred so when out nwith the BBk have to be careful
|
|
|
Post by devo344a on Mar 21, 2013 12:16:06 GMT -5
Its 71 and windy here in deming NM going to be windy for the next few days i hate it i have breathing problems and it stinks
|
|
|
Post by devo344a on Mar 21, 2013 10:18:12 GMT -5
I take lots of water some tools and cell phone i almostn didnt take it the other day and about 2 miles from the house the timing chain broke had to call my neighbor to bring my truck and rescue me here in NM you always take alot of water no matter what your in
|
|
|
Post by devo344a on Mar 20, 2013 20:56:16 GMT -5
I just bought a can from scrappy dog scooters its very easy to install if the engine blows oil it blows it into the can then goes to a hose to the dipstick tube
|
|
|
Post by devo344a on Mar 20, 2013 20:43:47 GMT -5
I just got done putting in a BBK I put on the stock head while waiting for the right rocker assy and i just put on the big bore head from scrappy and it had way more power with the stock head probably the more compression
|
|
|
Post by devo344a on Mar 20, 2013 17:47:43 GMT -5
Mine justn got faster the BBk kit and carb made it alot faster
|
|
|
gasoline
by: devo344a - Mar 20, 2013 17:46:41 GMT -5
Post by devo344a on Mar 20, 2013 17:46:41 GMT -5
I use high test on the or 86 mine doesnt run as good as on the 91 theres enough of a differance you can feel the change
|
|
|
Post by devo344a on Mar 20, 2013 12:28:20 GMT -5
Mornin all not to bad here going to be 77 degrees today but alot of wind wish my parts would get here i want to ride
|
|
|
Post by devo344a on Mar 19, 2013 17:02:30 GMT -5
What i did with my muffler was took a grinder and took the rear weld off and its like a cap i then took a saws all and cut it to about approx 8in that got rid of the baffles then where the pipe comes into the muffler i drilled 3 3/16 holes into the cap then i took the cap end i ground off ground around the muffler put the cap piece back on and soldered it and it has worked fine with the stock engine it gave it more low end and has worked great with the BBK
|
|
|
Real cheap
by: devo344a - Mar 19, 2013 13:42:53 GMT -5
Post by devo344a on Mar 19, 2013 13:42:53 GMT -5
well some of the parts are cheap the sale ones they have the BBK kit with other stuff for i think it was $49.00 today only and regular price is around $189.00. like i said i had to order a 50mm -100cc piston from them and will see how they are
|
|
|
Post by devo344a on Mar 19, 2013 13:27:19 GMT -5
I wanted to know if anyone has put the long case on the short case complete motor assy and does the short shaft and long shaft can they be interchanged. Im thinking of getting a 100cc long case and mine is a short case wonder how much problems i will have? ??
|
|