|
|
Post by devo344a on Apr 6, 2013 17:45:39 GMT -5
I checked the stock cam to the A-9 its the same the jug and the head are both the same height as the stock. I think I found the tin head gasket and I will use silicone like Doug suggested. The head gasket thickness is the only differance from stock and its a good bit I might put the stock head back on with the 100cc BBK and get the compression back up the power loss from putting on the big bore head was alot
|
|
|
|
Post by devo344a on Apr 6, 2013 17:24:12 GMT -5
Forgot dont have a way to check compression I broke the first chain after putting the BBK with a stock head on it alot of compression on that one then I put on the bigbore head from scrappy both times the chain was extremly tight
|
|
|
|
Post by devo344a on Apr 6, 2013 17:04:35 GMT -5
How do you find a chain with an extra link?? I know its tight thats why i didnt put the spring back in the tensioner I could barely push the chain down with a screwdriver can you buy a head gasket out of the tin for a BBK havnt been able to find one yet
|
|
|
|
Post by devo344a on Apr 6, 2013 14:41:31 GMT -5
I may have one soon where ya at Im in NM
|
|
|
|
Post by devo344a on Apr 6, 2013 14:39:12 GMT -5
This is the second chain to break have no idea why I installed a scrappydog BBk,A9cam and cant find a reason for it to break everything is the same height the only thing thats different is the head gasket the stock one was a tin one and the new one is thicker like the gasket on a car when i put in the second chain i didnt put the spring back into the tensioner and it was still a little tight but thought it would strech a little oh and its a 49cc with the 100cc BBK anyone have any ideas
|
|
|
|
Post by devo344a on Apr 4, 2013 11:53:53 GMT -5
I love riding my scoot and while at walmart one morning there was 12 scoots in the parking lot didnt believe there was so many here most of the people here that have motor cycles like my scoot and if it went a little faster i could go one rides with them
|
|
|
|
Post by devo344a on Apr 4, 2013 10:23:38 GMT -5
just did mine at .004 and it runs fine
|
|
|
|
Post by devo344a on Apr 2, 2013 12:04:15 GMT -5
They get more blood than that sticking my finger for blood thinness tests
|
|
|
|
Valve adj
by: devo344a - Apr 1, 2013 11:32:21 GMT -5
Post by devo344a on Apr 1, 2013 11:32:21 GMT -5
Thanks Dave got it done. My maunt lives in columbus and i used to live close to wheeling wv
|
|
|
|
Valve adj
by: devo344a - Apr 1, 2013 10:04:05 GMT -5
Post by devo344a on Apr 1, 2013 10:04:05 GMT -5
I know its probably been on here a million times but im going to adj the valves on my 49cc with BBK and A9 cam bigbore head I have found 4 different gaps what do you use?  ?? |
|
|
|
Post by devo344a on Apr 1, 2013 10:01:02 GMT -5
Best way to hide is buy a camper come out west where no one knows you and stay in the rv parks no one checks or cares who you are. I live in a 5th wheel and no one checks any one If i had to hide thats what i would do. Sorry you have problems like you do
|
|
|
|
Post by devo344a on Mar 31, 2013 19:18:52 GMT -5
Its metric if its going approx 50 kilomoters in milesperhour its approx half or 25 on the inside of the outer#s is MPH
|
|
|
|
Post by devo344a on Mar 29, 2013 23:05:10 GMT -5
What all do you have to do im home all day and it will be getting to hot to stay outside long
|
|
|
|
Post by devo344a on Mar 28, 2013 11:32:20 GMT -5
hi
|
|
|
|
Post by devo344a on Mar 28, 2013 11:22:36 GMT -5
The carbs are so cheap its better to get a new one the one i took off mine you cant get the bowl off or adj the new one you can
|
|
