|
|
Post by devo344a on Apr 15, 2013 17:37:32 GMT -5
Might have gotten a piece of the rope in a valve it doesnt take much
|
|
|
|
Post by devo344a on Apr 15, 2013 17:25:07 GMT -5
The timing chain problem has been solved The head gaskets were to thick I finally got the tin gasket and it went together perfectly and there was plenty of slack in the chain enough to even put the tensioner back on properly. Before i put it together I tryed Dougs Idea of silicone on the base gasket and it was almost enough I bolted the head on with the thick gasket and tryed the cam it was still to tight so when i got the tin gasket all was well again in scooter world. I took it a ride approx 6 miles and ran great. Thanks for all the help
|
|
|
|
Post by devo344a on Apr 14, 2013 12:24:02 GMT -5
weve had so much wind 20mph and up its to windy to ride the temp is ok from 75 to  degrees |
|
|
|
Post by devo344a on Apr 14, 2013 11:54:31 GMT -5
I have the same one the renegade 50 its a 2012 I was like you I bought the stage3 from scrappy with the 100cc bbk I bought the big bore head which i dint care for much and am going back to the stock head for the more compression i got the 20cc carb and all worked ok for the muffler I took the stock one and took the chrome pieces off and ay the end of the muffler i ground off the weld and its like a cap i then cut off the muffler to approx 8in and put 3 3/16 holes in the cap coming into the muffler from the pipe then reinstalled the rear cap back on and it made alot of differance thats what, ive done to mine the kits are pretty easy to install the speed limit in my town is 35 but its nice to have the power to take off and keep up with traffic
|
|
|
|
Post by devo344a on Apr 13, 2013 12:09:59 GMT -5
On my certificate of origen it says my 50cc will only do 30mph if they sayim going faster im taking the cert to court and giving it to the judge. they gave me a ticket for not being registered and didnt have thwe plates for NM i got everything and went to court the judge threw everything out but charged me court costs I was all happy till he told me the court cost was 87.00
|
|
|
|
Post by devo344a on Apr 13, 2013 8:50:15 GMT -5
I used to use rustolium all the time and found the Krylon paint & primer together and its alot better than rustolium its alot shineyer and goeson better but you can apply coats in about 10 minutes and the clear about the same
|
|
|
|
Post by devo344a on Apr 11, 2013 10:53:39 GMT -5
Got the new chain still waiting for the tin head gasket to see whats going on can measure then. I saved the broken chain if its still to tight I may take a link out of the broken one and put into the new one and thanks Ally for the 2 link site may have to try it
|
|
|
|
Post by devo344a on Apr 10, 2013 10:44:07 GMT -5
was going to but Ebay parts but something in the back of my mind told me not to so for once i listend Ive bought my engine parts from scrappy and chinese scooter psrts cheap and everything has been pretty good so far excpt for the timing chain breaking 3 times and Ive stumped MO at scrappy about it but he tryed and that counts alot
|
|
|
|
Post by devo344a on Apr 10, 2013 8:41:08 GMT -5
I used the plastic paint from Krylon on quite a few things scoots and atvs and never primed it and it came out great I painted my hocky mask about 7 months ago and didnt prime and used Krylon paint&primer mix its great stays real shiny and hasnt came off yet and have waxed it with no problem
|
|
|
|
Post by devo344a on Apr 9, 2013 8:20:26 GMT -5
Did you put the ground wires back on the head
|
|
|
|
Post by devo344a on Apr 8, 2013 13:47:36 GMT -5
Also ive been in touch with scrappydog to see if they can shed some light on the situation
|
|
|
|
Post by devo344a on Apr 8, 2013 13:44:55 GMT -5
everything was in place thats why this is so mysterious everything seems right cant wait to get the new chain and the tin head gasket to be able to measure it all
|
|
|
|
Post by devo344a on Apr 8, 2013 11:06:31 GMT -5
Well I mesured the height of the jug,head,and matched up the A-9 cam with the stock ones and the only differance is the head gasket when i get the new head gasket the tin one i will see how much differance there is with them
|
|
|
|
Post by devo344a on Apr 8, 2013 8:49:27 GMT -5
I bought a 6ft cable from walmart and a lock i chain it to posts threw the wheel mine only weighs 185 lbs and it would be easy to throw in a truck
|
|
|
|
Post by devo344a on Apr 6, 2013 21:23:12 GMT -5
What I willm do is when i get the new chain I will put the stock cam in and see if it is loose enough then I will know if its the cam or not. How much differance does the A-9 cam make ? And it was tight with both heads so it has to be either the A-9 cam or the head gasket you guys have been alot of help and I wanna thank ya
|
|
degrees