|
Post by devo344a on Apr 29, 2013 12:29:43 GMT -5
Well its not the valves. when it quits i found that if I spray carb cleaner is the vacum line going to the intake it will start and run for awhile.
I was looking at the enrichener and is it suppose to have power all the time or part? and where does it get its power from??
|
|
|
Post by devo344a on Apr 28, 2013 17:18:06 GMT -5
Will recheck the valves
|
|
|
Post by devo344a on Apr 28, 2013 15:24:46 GMT -5
I have no idea what the main jet size is it ran fine with the same jet with the same setup the valves are at 004 i checked them
droping the float will give it more gasoline right?
I tryed spraying gas into the carb and it wouldnt start ---pulled the plug a few times and it wasnt wet and looked normal
|
|
|
Post by devo344a on Apr 28, 2013 14:02:56 GMT -5
Thanks for the help and i changed carbs both had there own enricheners
|
|
|
Post by devo344a on Apr 28, 2013 13:16:00 GMT -5
I have a 2012 renegade50 49cc I have a BBk A9 cam 20mm carb, new CDI,new coil, I had problems with the head gasket had to have a tin one to get clearance for the timing chain ended up everything was put together fine. When i started it it ran fine got about 10miles on it and it would start and run untill it idled for a couple minutes then it would stall and wouldnt restart till aprox 10 to 15 minutes later thats all it would do, so i thought it was the cdi installed a new one with the orange coil from scrappy its AC not Dc it ran approx 15min then did the same thing i checked for spark it was ok was getting gas ok checked the kill switch its ok took the fuel shutoff and bypassed it it did the same thing put on the old carb same thing checked everything i can think of it will run great on the stand or driving untill u come to an idle then shut off and not run till it sets for approx 15min help me need some new ideas of what to check
|
|
|
Post by devo344a on Apr 25, 2013 11:46:15 GMT -5
I had trouble with mine I had to keep the funnel slightly out of the engine and pour very slowly
|
|
|
Post by devo344a on Apr 24, 2013 12:44:40 GMT -5
mine is saying milisous url and trogen has been blocked
|
|
|
Post by devo344a on Apr 23, 2013 18:30:36 GMT -5
From what ive readon here you take off the vacum line from the carb take off the fuel line put end where you can see it suck on the vacum line and if fuel comes out of the fuel line its working
|
|
|
Wickedatvs
by: devo344a - Apr 23, 2013 18:14:12 GMT -5
Post by devo344a on Apr 23, 2013 18:14:12 GMT -5
Its in santa fe NM and when you put the website in it has to read wickedatvs.com if you dont put in the s it wont come up rite
|
|
|
Post by devo344a on Apr 22, 2013 13:40:20 GMT -5
Theres one on wickedatvs.com maple 150, 2012 for $1079.00 and free to the door shipping
|
|
|
Post by devo344a on Apr 22, 2013 10:13:42 GMT -5
I have trouble in the wind here in NM it gets kinda bad at times I have the 10in wheels and almost everything is a problem we have gravel and it goes where it wants on it wish i had bigger tires and rims
|
|
|
Post by devo344a on Apr 20, 2013 18:32:00 GMT -5
I have the same one and scrappydog has most of the body parts i have to get a fering they tryed to steal mine and tryed to pick it up and they lifted right under the turn signals and brokethe fering on it glad they have the wheel lock on them they couldnt get it out
|
|
|
Post by devo344a on Apr 19, 2013 10:04:29 GMT -5
My neighbor has full coverage on his scoot and its only $ .00 a year here in NM
|
|
|
Post by devo344a on Apr 18, 2013 10:03:02 GMT -5
Im not sticking up for anyone but ive been useing chinesepartswholesale for a while now and havnt had a problem most of the things i have ordered are mostly small stuff and i guess when they screw me i wont loose much and will be done with them. Also i have had them ship fedex from shanghi china then put it in the mail. They have had a few parts i couldnt get anywhere else
|
|
|
Post by devo344a on Apr 17, 2013 9:01:04 GMT -5
Mine came off in pieces and i took it ll off and no problem yet
|
|