|
|
Post by devo344a on May 2, 2013 18:39:46 GMT -5
Did myou check if the fuel shut off is working?
To check all you do is take the fuel line off at the carb and then take off the vacum line to the shut off and suck on the vacum hose it should run gas out while sucking on the vacum hose
I just had a thread on here help im at my wits end with alot of good suggestions mine was doing the same thing
|
|
|
|
Post by devo344a on May 2, 2013 11:24:22 GMT -5
I always wipe all the parts that im painting with acitone or lacquer thinner it will take any contamanents off wax and such
|
|
|
|
Post by devo344a on May 2, 2013 7:53:39 GMT -5
Looks real good dont know if krylon has the pink you need but ive found the krylon primer/paint is alot shineyer and goes on better than rustolium I was a diehard rustolium user till i tryed the krylon
|
|
|
|
Post by devo344a on May 1, 2013 14:37:49 GMT -5
Happy-B-day  |
|
|
|
Post by devo344a on May 1, 2013 12:02:04 GMT -5
Scrappydogscooters is going to stock stroker cranks im not sure if there going to be for the 49ccs or the 150cc but there is a therad on here about it
|
|
|
|
Post by devo344a on May 1, 2013 11:58:14 GMT -5
Ive threatned it with a bonfire and would cook hotdogs over its burning body but it didnt help and im kinda glad gasoline flavored hotdogs dont sound real tastey lol
|
|
|
|
Post by devo344a on May 1, 2013 11:10:49 GMT -5
Ive checked the valves cold after setting all night so many times Im starting to have dreams about them.
Ive also taken and checked after its hot and they still have clearance
|
|
|
|
Post by devo344a on May 1, 2013 11:08:18 GMT -5
Mines like that and what i do is get the red silicone its high temp and i put a little on the gasket and put it in the head then i put some around the flange and it works great no leaks yet and ive done it 10 times
|
|
|
|
Post by devo344a on May 1, 2013 9:10:25 GMT -5
DX And It extended it worked properly
I plugged the enrichner hole with pennys and it ran alot better.
I finally got pissed and tore down the motor took it down had a spare piston and rings put them in and everything looked real good.
For alleyoop Iadjusted the valves while cold lol
put it all back together and it ran good i could shut it off and it would restart real quick took it a ride for about 30 min came back shut it off and it wouldnt start again
|
|
|
|
Post by devo344a on Apr 30, 2013 10:40:15 GMT -5
Look at my thread im having approx the same problem
Mines Help im at my wits end there are alot of good suggestions on it
|
|
|
|
Post by devo344a on Apr 30, 2013 10:36:59 GMT -5
Well tryed holding my finger over the enrichener it ran and the enrichener extended it never stalled till i took my finger off and it restarted this time. I also backed the screw out on the bowel drain and it seemed to have enough fuel coming out full hose steady stream. so if i was to plug the enrichner hole what would happen  ? Alleyoop-- if im understanding you right when the enrichener is extended its getting more fuel ?? right?? Just wanted to say thanx to everyone for there help so far Thats the worst time ive ever had sticking my finger in a hole for 5 minutes it seemed like a lifetime lol lol |
|
|
|
Post by devo344a on Apr 29, 2013 18:51:01 GMT -5
Alleyoop-I did check the valves for the 3rd time in the morning cold I also checked after it quit running th make sure there was clearance after it was hot.
I was going to back out the screw on the carb bowel in the morning and try what you said.
will try the start and run for the enrichener
|
|
|
|
Post by devo344a on Apr 29, 2013 16:49:54 GMT -5
I dont buy anything on E-bay. the rollers seem to work good i put the ones in on the kit and im having carb trouble rite now but i put on the stock carb to see if there was a differance and didnt notice any and i never changed the jets. the air filter works real good a little hard to get on the first time the reason i bought the kit was it had alot of the stuff i was going to get anyway the  jet is still in a bag never used it got the 22mm carb and it worked great my 2 cents |
|
|
|
Post by devo344a on Apr 29, 2013 16:40:08 GMT -5
I dont mind the tell it how it is ive been working on vehicles of some sort all my life. Its hard to find alot of info on some of these scooters and im not afraid to ask and most of the time i can sort out the .
but anyway there is no power to the enricher and from what ive found its hooked up to the voltage regulator and tested with an ohm meter and the yellow wire is the wire from the enricher to the regulator but no voltage
I was going to hook up 12 volt to the enricher till i saw a resister was used.
If the enricher works like a choke if its running fine without it everything should be ok.
yest when i took the carb apart i blew threw all the jets and such but I believe im going to have to tear it apart again believe it may be the float level or something else in it
|
|
|
|
Post by devo344a on Apr 29, 2013 12:46:36 GMT -5
I bought the stage 3 performance kit its $99.00 then bought the A-9 cam and the 20mm carb and the big bore head from scrappy dog
the kit has alot more things than your getting for $89.00 there at scrappydogscooters.com
Im assuming its a 49cc
|
|
jet is still in a bag never used it got the 22mm carb and it worked great