Freshman Rider
Currently Offline
Posts: 55
Likes: 0
Joined: Jul 8, 2013 0:35:19 GMT -5
|
Post by djscootz on Jul 24, 2013 10:57:38 GMT -5
I don't think that my 1986 Honda Elite was really meant to be worked on by the owner, especially with the CVT and the way it is mounted. There is a passenger pedal bracket that is welded to the steel frame and is not removable. This blocks taking off the CVT cover without the variator coming with it because there just isn't enough clearance. I had to use an impact wrench to change my belt just because I had to take the whole thing apart together. Just remember if you use an impact wrench, put the nut back on the threads by hand first before using the impact wrench to avoid stripping the threads.
|
|
Freshman Rider
Currently Offline
Posts: 55
Likes: 0
Joined: Jul 8, 2013 0:35:19 GMT -5
|
Post by djscootz on Jul 24, 2013 10:45:01 GMT -5
[replyingto=scootnwinn]scootnwinn[/replyingto]Yep, Right hand drive and no seat belts required. It does have seat belts added because my dad is no idiot. That car has a lot of my childhood memories, moving to Australia for 2 years and then bringing the car back to the states with us as a memento. It needs the radiator fixed but it is a blast.
My brother-in-law came up with Mcfly and I thought it was a great name. May stick with that.
|
|
Freshman Rider
Currently Offline
Posts: 55
Likes: 0
Joined: Jul 8, 2013 0:35:19 GMT -5
|
Post by djscootz on Jul 24, 2013 0:52:18 GMT -5
Here are a few pictures of the scooter: 1986 Honda Elite Deluxe 150cc   This is the step through of the scooter with my father's 1968 Morris "Mini" Cooper S that we bought in Australia and brought back to the states.  |
|
Freshman Rider
Currently Offline
Posts: 55
Likes: 0
Joined: Jul 8, 2013 0:35:19 GMT -5
|
Post by djscootz on Jul 24, 2013 0:41:03 GMT -5
I was unable to really cross reference the belt since Honda is really secretive in their belt numbers so that you have to buy their parts (smart business move). I bought a Honda belt from an online dealer costing me $  with shipping which I think is steep, but it is a guaranteed fit (which it was). I am getting pretty good at disassembling the paneling and some components of this scooter after cleaning everything. Took just a few minutes to get the side panel off and replace the belt. The new belt works well and doesn't slip like the old one. The only problem I am having now is that the belt still squeals when starting from a dead stop at a strong throttle. I have read a lot of stuff and found that this is due to "glazing" of the clutch. Now to take off the clutch, clean it with a solvent, and sand it a little bit to help grip the belt. I also was able to take some pics after cleaning all the body panels and trying to make it shine. Hope you like it. P.S. I am stuck between a few names for the scooter: Carmen, Phoenix, and Mcfly (As in Marty Mcfly). Weigh in with your opinion! |
|
Freshman Rider
Currently Offline
Posts: 55
Likes: 0
Joined: Jul 8, 2013 0:35:19 GMT -5
|
Post by djscootz on Jul 24, 2013 0:31:33 GMT -5
Granted I am not in the market for a scooter currently so my input doesn't really matter, but whenever I make big purchases I am always willing to pay a little more to buy quality and from a trustworthy source. I know that the internet can allow for quicker and less proper communication, but I steer clear of people who have trouble using grammar, spelling correctly (built-in spell check), and don't really answer the question you are looking for. Just my 2 cents on this thread. I understand what you are saying but have you ever thought that maybe English isn't his first language? The internet doesn't belong only to America. If Icebear is the only company manufacturing these trikes, the private label badge isn't going to turn me off. Is there a true, original, Chinese bike? I understand that there are a lot of foreigners who have opened their own business and I have nothing against it. I interact with a large population of international students through my job at my university and have dealt with language barriers in that job. All I meant is that sometimes things like poor grammar and avoiding questions can mean that you should be wary going in. Not that it guarantees a problem, but that in the future if there is a problem, communication may be compromised. I always advocate for being a smart consumer regardless of who you buy from. I apologize if I came across differently than intended. One thing to remember about Chinese made products are that patent laws in China are almost non-existent, so I wouldn't guarantee that Ice Bear is the only manufacturer building these scooters. Jim from Rapid Repair most likely knows more about it than I do though so I yield the floor to him. |
|
Freshman Rider
Currently Offline
Posts: 55
Likes: 0
Joined: Jul 8, 2013 0:35:19 GMT -5
|
Post by djscootz on Jul 23, 2013 21:26:39 GMT -5
Granted I am not in the market for a scooter currently so my input doesn't really matter, but whenever I make big purchases I am always willing to pay a little more to buy quality and from a trustworthy source. I know that the internet can allow for quicker and less proper communication, but I steer clear of people who have trouble using grammar, spelling correctly (built-in spell check), and don't really answer the question you are looking for. Just my 2 cents on this thread.
|
|
Freshman Rider
Currently Offline
Posts: 55
Likes: 0
Joined: Jul 8, 2013 0:35:19 GMT -5
|
Post by djscootz on Jul 22, 2013 23:55:00 GMT -5
I am sure they taught you this in the safety course, but just a reminder to "look where you want the bike to go." Try turning your head harder into those stopped right turns and it may correct on its own.
|
|
Freshman Rider
Currently Offline
Posts: 55
Likes: 0
Joined: Jul 8, 2013 0:35:19 GMT -5
|
Post by djscootz on Jul 21, 2013 21:26:58 GMT -5
Sounds like you have a lot more riding experience than me! Hope you pick a good one, get it fast, and enjoy riding. Welcome!
|
|
Freshman Rider
Currently Offline
Posts: 55
Likes: 0
Joined: Jul 8, 2013 0:35:19 GMT -5
|
Post by djscootz on Jul 21, 2013 18:03:27 GMT -5
I put a new drive belt on last night. Riding today revealed that it didn't fix the squeal starting hard from a dead stop. I tried to do hard starts to burn off the glaze, but to no avail. Now it is time to clean the clutch.
|
|
Freshman Rider
Currently Offline
Posts: 55
Likes: 0
Joined: Jul 8, 2013 0:35:19 GMT -5
|
Post by djscootz on Jul 21, 2013 16:19:59 GMT -5
Quite the project. Hopefully it all works out for you with the swing arm. I can't imagine trying to fix that myself.
|
|
Freshman Rider
Currently Offline
Posts: 55
Likes: 0
Joined: Jul 8, 2013 0:35:19 GMT -5
|
Post by djscootz on Jul 20, 2013 11:47:03 GMT -5
Cool scooter and nice pics (must be a solid camera). You could do a little offroading with those tires, I guess assuming all the mechanical issues work out soon. Best of luck to you. Keep us informed.
|
|
Freshman Rider
Currently Offline
Posts: 55
Likes: 0
Joined: Jul 8, 2013 0:35:19 GMT -5
|
Post by djscootz on Jul 20, 2013 10:35:14 GMT -5
I don't know that area well, sorry. Here is a video to give you an idea if you can do it yourself. |
|
Freshman Rider
Currently Offline
Posts: 55
Likes: 0
Joined: Jul 8, 2013 0:35:19 GMT -5
|
Post by djscootz on Jul 19, 2013 23:07:28 GMT -5
I know that Linhai's have a pretty good reputation now for quality scooters. I bought a Znen from Valley Scooters awhile ago and it had some shipping and mechanical mishaps but I really liked it. I would go with the Znen Interceptor out of those choices.
|
|
Freshman Rider
Currently Offline
Posts: 55
Likes: 0
Joined: Jul 8, 2013 0:35:19 GMT -5
|
Post by djscootz on Jul 19, 2013 18:19:27 GMT -5
I really like the look of the body on that scooter. Whether or not you are going fast, it looks fast. Congratulations on your purchase.
|
|
Freshman Rider
Currently Offline
Posts: 55
Likes: 0
Joined: Jul 8, 2013 0:35:19 GMT -5
|
Post by djscootz on Jul 18, 2013 12:34:29 GMT -5
That is quite the upgrade. Should be awesome for performance. Can't wait to hear how it turns out
|
|
with shipping which I think is steep, but it is a guaranteed fit (which it was). I am getting pretty good at disassembling the paneling and some components of this scooter after cleaning everything. Took just a few minutes to get the side panel off and replace the belt.