Post by keltex78 on Jan 15, 2014 12:40:11 GMT -5
I have the Jonway YY250T with the large trunk box, that I use extensively. The large box was a big reason why I selected this particular scooter.
As usual with this box/scooter combo, the box has always rattled badly. When I installed the box, I used rubber washers in an attempt to dampen some of the vibration, but apparently, that didn't help. I was examining it the other day and noted several large cracks in the base of the box, extending from the rear mounting holes. These cracks were fairly severe, extending 2-3 inches in each direction.
First off, I bought the bike to SAVE $$$, so I'm not springing for a Givi; I'm just cheap like that!
Since I like the size of the trunk (except for the fact that it won't hold my full-face helmet), my initial plan is to attempt to repair it by bedding the interior with fiberglass fabric/resin:
www.amazon.com/Bondo-422-Fiberglass-Resin-Repair/dp/B000BO7CVK/
I've used this stuff before and know that it is durable and very easy to apply. Also, bedding the interior would allow me to add some reinforcement at the base to dampen and minimize vibration.
But, this would also be a good opportunity for me to upgrade the trunk. I've looked around a bit and found some "Universal" trunks that seem like they might be decent for around $50 shipped:
www.amazon.com/Universal-Motorcycle-Scooter-Touring-Luggage/dp/B004IAC3ZS/
...and this "Bestem" branded box for about $
:
www.amazon.com/dp/B001O79DHY/
I would like something a bit more rugged than the flimsy factory box to minimize a lot of the rattling. Size is a big factor as I sometimes have to carry tools or some PC gear between sites. I have a backpack case for carrying a laptop, so the trunk is mostly for tools, small peripherals, accessories, etc. I don't carry passengers so an integrated backrest isn't required. Ideally, a replacement would be big enough for me to stash my full-face helmet, but that's not essential.
Does anyone have any suggestions regarding any of these Universal aftermarket trunks? Are they junk (i.e., worse than the factory case)? Anyone know of any particularly good value trunks? If not, I'm going for the fiberglass mat and resin kit...
As usual with this box/scooter combo, the box has always rattled badly. When I installed the box, I used rubber washers in an attempt to dampen some of the vibration, but apparently, that didn't help. I was examining it the other day and noted several large cracks in the base of the box, extending from the rear mounting holes. These cracks were fairly severe, extending 2-3 inches in each direction.
First off, I bought the bike to SAVE $$$, so I'm not springing for a Givi; I'm just cheap like that!
Since I like the size of the trunk (except for the fact that it won't hold my full-face helmet), my initial plan is to attempt to repair it by bedding the interior with fiberglass fabric/resin:
www.amazon.com/Bondo-422-Fiberglass-Resin-Repair/dp/B000BO7CVK/
I've used this stuff before and know that it is durable and very easy to apply. Also, bedding the interior would allow me to add some reinforcement at the base to dampen and minimize vibration.
But, this would also be a good opportunity for me to upgrade the trunk. I've looked around a bit and found some "Universal" trunks that seem like they might be decent for around $50 shipped:
www.amazon.com/Universal-Motorcycle-Scooter-Touring-Luggage/dp/B004IAC3ZS/
...and this "Bestem" branded box for about $
:www.amazon.com/dp/B001O79DHY/
I would like something a bit more rugged than the flimsy factory box to minimize a lot of the rattling. Size is a big factor as I sometimes have to carry tools or some PC gear between sites. I have a backpack case for carrying a laptop, so the trunk is mostly for tools, small peripherals, accessories, etc. I don't carry passengers so an integrated backrest isn't required. Ideally, a replacement would be big enough for me to stash my full-face helmet, but that's not essential.
Does anyone have any suggestions regarding any of these Universal aftermarket trunks? Are they junk (i.e., worse than the factory case)? Anyone know of any particularly good value trunks? If not, I'm going for the fiberglass mat and resin kit...
