|
|
Post by domindart on May 8, 2013 3:26:53 GMT -5
I know that you guys do a lot of work to your scooter yourself so here is where you can post the work. clean it, wrench on it, modd? What did you do to your scoot today?? I'll start. I have been playing with velcro lately, sticking my gps to the dash, mp3 player......I tried to stick my camcorder to the dash today to get some good ride vid but it was just too darn shaky so I don't think that works  |
|
|
|
Post by rockynv on May 8, 2013 3:39:16 GMT -5
I put gas in it and rode.
Have an Ottor Box Commutor for my Smart Phone so I just clip it to may riding jackets front pocket, start recording and ride.
|
|
|
|
Post by domindart on May 8, 2013 3:43:53 GMT -5
I've done a few riding shots w my smart phone sticking out my front pocket but its not quite the angle I want
|
|
|
|
Post by jeepsteve92xj on May 8, 2013 7:37:13 GMT -5
I rode one to work. Znen
The other will get more wrenching tonight - stator and R/R upgrade, and EFI, in process. Xingyue
|
|
|
|
Post by spandi on May 8, 2013 7:56:09 GMT -5
Heading to Home Despot for Bowling ally wax, washers for larger cooling fan upgrade, and more sandpaper for rough spots on the frame before repainting.
|
|
|
|
Post by devo344a on May 8, 2013 8:01:32 GMT -5
Just looked at it all day waiting for parts
|
|
Freshman Rider
Currently Offline
Posts: 56
Likes: 2
Joined: May 14, 2013 22:50:01 GMT -5
|
Post by chihuahuas on May 8, 2013 10:21:55 GMT -5
Hugged it , Sang it a song, Prayed for it, Filled the tank with alcohol, I gonna drive it under the influence, Stopped calling her "She: and started calling her ""  |
|
|
|
Post by onewheeldrive on May 8, 2013 12:56:13 GMT -5
I just stared at it. It's in pieces. Lol. I'll have it running in less than 2 weeks though.
|
|
|
|
Post by wilds on May 8, 2013 14:03:03 GMT -5
Adjusted the the EFI ECU so the engine gets a bit more fuel.
|
|
|
|
Post by oldchopperguy on May 8, 2013 16:09:45 GMT -5
I just stared at it. It's in pieces. Lol. I'll have it running in less than 2 weeks though. Leo in Texas |
|
|
|
Post by hank on May 8, 2013 16:15:18 GMT -5
Hi
It was raining all day so i gave "Spectre" an engine and gear oil change and adjusted the valves "April" needed no maintenance
Now that the weather is clearing up i shall take them both on some good long rides this evening
Take care and ride safely dear friend
Yours Hank
|
|
|
|
Post by domindart on May 8, 2013 18:35:30 GMT -5
Rode mine some today, not much
|
|
|
|
Post by teddy554 on May 8, 2013 18:42:00 GMT -5
Pushed it to the gas station drain all the gas cause of water and refilled it
|
|
|
|
Post by jeepsteve92xj on May 8, 2013 19:02:29 GMT -5
rode the Znen to work, rode home with a couple stops on the way, got home, drained and filled the engine oil.
Pulled the trans cover and traded the 17gram rollers out for 9.8 gram sliders. Still jerky at lights but I think the idle is way too high. Time to swap the carb. Maybe tomorrow night.
No work on the Xingyue tonight.
|
|
Sophomore Rider
Currently Offline
Posts: 137
Likes: 1
Joined: Mar 4, 2013 17:29:00 GMT -5
|
Post by ilovenxstage on May 8, 2013 20:03:03 GMT -5
Installed an air scoop on the fan cover and relocated my GPS mount, then I rode it  |
|
