|
|
Post by PCBGY6 on Jun 9, 2013 13:20:45 GMT -5
DX
|
|
|
|
Post by sailracer on Jun 9, 2013 13:26:23 GMT -5
[replyingto=larry001964]larry001964[/replyingto]What about the head?
|
|
|
|
Post by sailracer on Jun 9, 2013 13:28:33 GMT -5
Shelly offered me the same, but is a head included in that deal or what?
|
|
|
|
Post by sailracer on Jun 9, 2013 13:31:39 GMT -5
Here's a thought, Can you fit the crank, and top end of that motor in a qmb139 case?Or are the Jug bolts in a bigger pattern? Just thinking outside of the box  |
|
|
|
Post by larry001964 on Jun 9, 2013 20:56:34 GMT -5
Hi guys, Well here was the deal from scrappy, They decided to send me a new long case 139 engine with a 100 bbk (83cc actual). The 150cc engine they told me to keep.. Shelly was saying it would cost more to ship it back to them than it's worth, Needless to say I'm very surprised... So I guess I have a 150 engine... I Wish so badly i could fit it in Fawkes, but lots of mods on that and I don't have access to a welder to reposition the motor mounts.. So I'm not sure what to do with this 150, But I'm thinking about finding a 150 frame and putting it in that.. Hi Larry outstanding That turned out very well in the end, congratulations Kudos to Shelly and scrappys,  they done you good  ;D Take care and ride safely dear friend Yours Hank Yea they did do me good, and that is why i posted it... So many times only the bad news is what travels and not the good... I felt like i should post the good scrappy did me.. |
|
|
|
Post by larry001964 on Jun 9, 2013 21:01:46 GMT -5
Here's a thought, Can you fit the crank, and top end of that motor in a qmb139 case?Or are the Jug bolts in a bigger pattern? Just thinking outside of the box Yea the Jug and piston are much bigger, and the 139 drive components would never withstand the stresses of that.. i had trouble with just 100cc's and the drive components.. |
|
|
|
Post by sailracer on Jun 10, 2013 4:26:54 GMT -5
[replyingto=larry001964]larry001964[/replyingto]you know, that was part of my thinking when I bought the complete engine from scrappys. It says on the website that it is "generally a much beefier version of the stock qmb139.Did scrappys give you a head with that kit? I havent yey made my decision on what to do about this, take the offer or get a refund.
Jack
|
|
|
|
Post by larry001964 on Jun 10, 2013 6:53:27 GMT -5
[replyingto=salracer]sailracer[/replyingto]Well I have two NCY 50mm big bore heads, and an NCY HP cam, so i didn't even ask if it came with a bb head.. I don't know if it comes with one, Just never even thought to ask..
|
|
|
|
Post by larry001964 on Jun 10, 2013 7:03:21 GMT -5
you know, that was part of my thinking when I bought the complete engine from scrappys. It says on the website that it is "generally a much beefier version of the stock qmb139.Did scrappys give you a head with that kit? I havent yey made my decision on what to do about this, take the offer or get a refund. Jack A bbk is no big deal to install, so I went with the deal they offered, Just figured id install the bb head, cam, gearing, 20mm carb, and hp exhaust when i did the bbk. |
|
|
|
Post by sailracer on Jun 10, 2013 8:14:52 GMT -5
It probably does. Ya know, I should get a little more of an incentive from them. From what I gather, all the guys who got the wrong motor get to keep em... Free! Since I'm the one who gave shelly the Heads up ,and told her to double check on those motors. She caught mine before I got it and reversed the shipping. Me an my big mouth. Who knows how many more motors they'd have given away?
Oh well, It was the right thing to do anyway..
|
|
|
|
Post by larry001964 on Jun 14, 2013 8:30:30 GMT -5
Just an update,
My engine from scrappy arrived last nite, I'm in the process of getting it ready to run, It did arrive with the 83bbk kit inside the box, and a complete gasket set...
So now I'm tearing down Fawkes old engine for the short shaft, gearing, Hp cam and I have the bb head ready... A few hours work and i doubt ill get it done today, more than likely Sunday Fawkes will be back... Wish me luck folks..... God I missed riding him I really can't wait..
|
|
|
|
Post by lykos23 on Jun 14, 2013 9:16:25 GMT -5
[replyingto=larry001964]larry001964[/replyingto]Good luck!  |
|
|
|
Post by sailracer on Jun 14, 2013 9:30:59 GMT -5
Wow Gladd to hear that news! I hope everything is "SMOOTH SAILING"from here on out for you.This has really been a bad trip for all of us involved. Now I cant wait for mine to arrive.Jack
|
|
|
|
Post by larry001964 on Jun 15, 2013 22:21:37 GMT -5
Hi everyone, Well all the mods are done to the new motor, It's an 50 mm bbk and head, hp cam, 20 mm carb,  mj, Hi Flow muffler, and 17/49 gearing.... Tomorrow I will install it in Fawkes and hopefully be back on the road after a few adjustments.... Yea !!!!!!!!!  |
|
|
|
Post by sailracer on Jun 16, 2013 5:50:57 GMT -5
 Hi everyone, Well all the mods are done to the new motor, It's an 50 mm bbk and head, hp cam, 20 mm carb, mj, Hi Flow muffler, and 17/49 gearing.... Tomorrow I will install it in Fawkes and hopefully be back on the road after a few adjustments.... Yea !!!!!!!!! Cool Beans! I'm doing the same to mine (stock cam though) and i'm not changing the gears yet, As oon as I get my stuff from scrappy. Glad to see it finally done (a month late, but done) What are you running for variator? let us know how it runs. and Happy Fathers Day Too
|
|
Main Jet
jet
