|
|
Post by devinchasteen15 on Jan 29, 2015 18:44:58 GMT -5
Maybe the Video will tell something. We have to go by what you tell us to try and diagnose the problem. If it has spark and you poured some gas down the intake and it did NOT even fire once that makes no sense. Something is wrong but all the things that would cause this you say are working. If you have a spark and gas it will at least attempt to start, it may not start but it will fire at least a few times. Have you adjusted both valves to .003 inchs? Take pictures of the CARB area and hoses NOT the CVT that comes into play AFTER the motor is running. I'm sorry I'm not making sense. I'm starting to get really frustrated with it. I don't want to give up on it. So I want to keep trying. I will try to make more sense from now on |
|
|
|
Post by devinchasteen15 on Jan 29, 2015 18:49:01 GMT -5
Would anything cause it to not fire in the cylinder? A bad ENGINE TO FRAME ground will cause the Spark Plug to NOT fire when in the motor.  |
|
|
|
Post by alleyoop on Jan 29, 2015 18:50:50 GMT -5
That is the BATTERY Negative terminal post. You need a GROUND WIRE FROM THE VALVE COVER TO THE FRAME NOT TO THE BATTERY.
|
|
|
|
Post by devinchasteen15 on Jan 29, 2015 18:56:49 GMT -5
That is the BATTERY Negative terminal post. You need a GROUND WIRE FROM THE VALVE COVER TO THE FRAME NOT TO THE BATTERY. Where at on the frame? The smaller wire coming off the valve cover is taped to a blue wire. Is there even supposed to be two wires on the valve cover? |
|
|
|
Post by alleyoop on Jan 29, 2015 19:03:45 GMT -5
There already should be a ground wire FROM THE BATTERY to the frame. So take the OTHER ENDS OF THE GROUND wires ON THE VALVE COVER and connect them to the same spot the BATTERY GROUND is connected to on the frame. Take a picture please that ground wire could be your whole problem. Here is a ground wire FROM the valve cover to the frame:  |
|
|
|
Post by jerseyboy on Jan 29, 2015 19:08:52 GMT -5
Hmmmmmm,,,no wonder it wont start,,I think he has the valve cover grounded to batt and the small wire to frame,,maybe somebody switched them around...this is getting intresting,,DONT QUIT BRO,,YOU WILL GET IT,,WE ARE THE BEST GY6 SCOOTER TECHS ON THE NET!!!  |
|
|
|
Post by devinchasteen15 on Jan 29, 2015 19:11:05 GMT -5
There already should be a ground wire FROM THE BATTERY to the frame. So take the OTHER ENDS OF THE GROUND wires ON THE VALVE COVER and connect them to the same spot the BATTERY GROUND is connected to on the frame. Take a picture please that ground wire could be your whole problem. Here is a ground wire FROM the valve cover to the frame: I'm back at home right now but I have some pictures where you can see the wire. I'll upload them real quick |
|
|
|
Post by devinchasteen15 on Jan 29, 2015 19:14:55 GMT -5
I meant the green wire is taped to a yellow and green wire. There is also a blue wire taped to a yellow wire
|
|
|
|
Post by alleyoop on Jan 29, 2015 19:16:51 GMT -5
WOW Nice touch..(HAHA). Somebody did not know what in the they were doing.
|
|
|
|
Post by devinchasteen15 on Jan 29, 2015 19:18:51 GMT -5
WOW Nice touch..(HAHA). Somebody did not know what in the they were doing.  |
|
|
|
Post by devinchasteen15 on Jan 29, 2015 19:21:36 GMT -5
WOW Nice touch..(HAHA). Somebody did not know what in the they were doing. HAHA I've been wanting to order a new wiring harness but its always out of stock on www.eagleatvparts.com/ I would order another wire harness but I'm afraid it won't work if its not specifically for the atm50 a1 |
|
|
|
Post by devinchasteen15 on Jan 29, 2015 19:28:54 GMT -5
WOW Nice touch..(HAHA). Somebody did not know what in the they were doing. Video finally uploaded Tao tao atm 50 no start: |
|
|
|
Post by alleyoop on Jan 29, 2015 19:35:49 GMT -5
Ok I labeled things 1 to 5:  #5 looks like those two wires The thick Green one and the thin green one go to the VALVE COVER BOLT-- IS THAT CORRET? And the other ends of those SHOULD BE ON A BOLT ON THE FRAME..(YES OR NO). #2 and #3 WHERE are they coming from? #1 WHY is the COIL wire tapes #4 that is the PAIR system and I do not see any BOLTS holding the chrome Pipe to the HEAD. Can you answer my concerns. |
|
|
|
Post by alleyoop on Jan 29, 2015 19:37:13 GMT -5
The Video Motor is not turning over fast enough weak battery not good .
|
|
|
|
Post by alleyoop on Jan 29, 2015 19:40:52 GMT -5
The Video Motor is not turning over fast enough weak battery not good . Ok I think you have some things all wrong on that thing. First of all on the picture you took of the wires there is a Pair Chrome pipe in front of the Valve cover and in the VIDEO NO CHROME PIPE and the valve is open? So take a picture of the front of the valve cover please.
|
|
..BAD TO THE BONE..
