Currently Offline
Posts: 0
Likes:
Joined: Nov 22, 2024 2:48:52 GMT -5
|
Post by Deleted on May 30, 2013 10:07:22 GMT -5
But finally done!!! Runs like a raped ape!! ;D
|
|
|
|
Post by hank on May 30, 2013 10:10:49 GMT -5
|
|
Currently Offline
Posts: 0
Likes:
Joined: Nov 22, 2024 2:48:52 GMT -5
|
Post by Deleted on May 30, 2013 10:19:23 GMT -5
I was trying to avoid additional cost but if i find myself doing this sort of thing a lot ill get one for sure.
|
|
New Rider
Currently Offline
Posts: 21
Likes: 0
Joined: May 14, 2013 3:46:06 GMT -5
|
Post by tiopedro on May 30, 2013 10:23:28 GMT -5
DX
or.. you can get a cheaper 12v impact wrench.. I had a hard time with my variator nut, got a cheap 12v impact and came out in 5 seconds..
|
|
|
|
Post by scootnwinn on May 30, 2013 11:13:16 GMT -5
2 words (?? or one??) Snap-on
|
|
Currently Offline
Posts: 0
Likes:
Joined: Nov 22, 2024 2:48:52 GMT -5
|
Post by Deleted on May 30, 2013 11:28:03 GMT -5
Well all i gotta say is as tough as it is getting the thing off I cant imagine them ever coming loose on their own just using moderate force when re-tightening.
|
|
|
|
Post by lykos23 on May 30, 2013 11:31:06 GMT -5
If you think the variator nut is hard, just wait 'til you try taking the clutch bell nut off. And for that matter, the clutch bell nut is nothing compared to the Clutch Nut. Oh, man the things that are in store for you...  |
|
|
|
Post by jeepsteve92xj on May 30, 2013 11:40:34 GMT -5
Picked up the 1/2" electric impact form HF last week for $40 with an email coupon. Haven't even opened the box yet.
|
|
|
|
Post by rockynv on May 30, 2013 11:46:32 GMT -5
If you have a Harbor Freight near you get on their email list and watch the coupons that come in. If you bent 2 wrenches consider replacing them with the Pitsburgh brand from Harbor Freight as they come with a lifetime guaranty.
|
|
|
|
Post by rockynv on May 30, 2013 11:49:29 GMT -5
2 words (?? or one??) Snap-on Williams Industrial are much higher quality however if you have to ask ther price you probably can't afford them. The will last long enough to be handed down to your children and grandchildren and possibly their grandchildren too. On a budget the Pitsburgh from Harbor Freight are just fine and more than up to the job. |
|
|
|
Post by earlwb on May 30, 2013 16:07:04 GMT -5
I use an extra long breaker bar. But it may help to have extra body weight that you can use to your advantage too. I have seen guys use a heavy duty pipe slipped over a breaker bar to even more leverage too.
You also need to look close at the variator or clutch nut for that matter. They usually put some epoxy on the nut to help try to keep it from coming loose. So you might have to chisel off some of the epoxy to make it easier to get the nut loose.
|
|
Sophomore Rider
Currently Offline
Posts: 174
Likes: 1
Joined: Mar 17, 2013 11:51:20 GMT -5
|
Post by indymoped on May 30, 2013 19:55:43 GMT -5
Sounds like you need some higher quality wrenches. lol
|
|
|
|
Post by dragonsparks on May 30, 2013 21:19:47 GMT -5
I use a heat gun to make it pliable to remove. Works on disk brake rotor screw's to...
Dave.
|
|
Currently Offline
Posts: 0
Likes:
Joined: Nov 22, 2024 2:48:52 GMT -5
|
Post by Deleted on May 30, 2013 22:10:07 GMT -5
Funny how they consistently manage to get that ONE nut tight all the time!
|
|
|
|
Post by ridecheap on May 30, 2013 22:13:44 GMT -5
I used a wrench and a rubber mallet. A mallet to hit the wrench and it works perfect to put it back on also.
|
|
Main Jet
