Freshman Rider
Currently Offline
Posts: 67
Likes: 0
Joined: Apr 15, 2013 17:11:59 GMT -5
|
Post by justinbabcock1125 on Apr 22, 2013 17:20:12 GMT -5
I hit it with starting fluid an tried to start it with the kick start a cough or to wasnit...now what is the air/fuel mix screw general set at on a bbk does it change from the simple 2 turn from all the way in?
|
|
Freshman Rider
Currently Offline
Posts: 67
Likes: 0
Joined: Apr 15, 2013 17:11:59 GMT -5
|
Post by justinbabcock1125 on Apr 22, 2013 16:56:02 GMT -5
Ill trying the car..
|
|
Freshman Rider
Currently Offline
Posts: 67
Likes: 0
Joined: Apr 15, 2013 17:11:59 GMT -5
|
Post by justinbabcock1125 on Apr 22, 2013 16:53:37 GMT -5
Also can i use a stronger battery with out friying stuff?
|
|
Freshman Rider
Currently Offline
Posts: 67
Likes: 0
Joined: Apr 15, 2013 17:11:59 GMT -5
|
Post by justinbabcock1125 on Apr 22, 2013 16:51:31 GMT -5
The etxra one like the hose that went to the air box...an the one coming off mycarb intake....then yes
|
|
Freshman Rider
Currently Offline
Posts: 67
Likes: 0
Joined: Apr 15, 2013 17:11:59 GMT -5
|
Post by justinbabcock1125 on Apr 22, 2013 16:35:06 GMT -5
Ok well it didnt start....my battery died right away because it acted like it was hard to turnnover it kicks over way harder also.....batterys back on the trickle charger but i got spark an i here my exhaust chuging good an hard ...so ill spray it with starting fluid when my batterys charged a bit.....any other advice...also i order a  main jet an installed it i thinkbit might be to big but the main jet has no impact till u hit the gas correct?...an might inneed a more powererful battery now? |
|
Freshman Rider
Currently Offline
Posts: 67
Likes: 0
Joined: Apr 15, 2013 17:11:59 GMT -5
|
Post by justinbabcock1125 on Apr 22, 2013 16:09:22 GMT -5
Thanks a bunch im ajout to try to start it up .....X-ed fingers
|
|
Freshman Rider
Currently Offline
Posts: 67
Likes: 0
Joined: Apr 15, 2013 17:11:59 GMT -5
|
Post by justinbabcock1125 on Apr 22, 2013 15:54:25 GMT -5
Will oil leak out the valve cover were every thing is conated tho?
|
|
Freshman Rider
Currently Offline
Posts: 67
Likes: 0
Joined: Apr 15, 2013 17:11:59 GMT -5
|
Post by justinbabcock1125 on Apr 22, 2013 15:45:08 GMT -5
If i take the tube off the bracket falls releaseing the hose bracket on the bottomwhich is attchet to my valve covertaking these offthese to expose flimsy valves attacted to my valve cover......
|
|
Freshman Rider
Currently Offline
Posts: 67
Likes: 0
Joined: Apr 15, 2013 17:11:59 GMT -5
|
Post by justinbabcock1125 on Apr 22, 2013 15:04:16 GMT -5
Can i simple attach everything an leave out the 2bolts that were there no holes from?
|
|
Freshman Rider
Currently Offline
Posts: 67
Likes: 0
Joined: Apr 15, 2013 17:11:59 GMT -5
|
Post by justinbabcock1125 on Apr 22, 2013 14:19:28 GMT -5
Ok back again ...im installing my 80cc bbk an my 80cc head has no way of attaching the silver tube coming off my valve cover that i belive is the egr valve. Im looking for away around it plz help me out...in detail would help best plz help.........2012 taotao atm-50 gy6
|
|
Freshman Rider
Currently Offline
Posts: 67
Likes: 0
Joined: Apr 15, 2013 17:11:59 GMT -5
|
Post by justinbabcock1125 on Apr 20, 2013 15:00:02 GMT -5
I bought a  an a ... |
|
Freshman Rider
Currently Offline
Posts: 67
Likes: 0
Joined: Apr 15, 2013 17:11:59 GMT -5
|
taotao help?
by: justinbabcock1125 - Apr 19, 2013 22:41:43 GMT -5
Post by justinbabcock1125 on Apr 19, 2013 22:41:43 GMT -5
Ok after 80ccbbk what do i set the valve height at .004 still?
|
|
Freshman Rider
Currently Offline
Posts: 67
Likes: 0
Joined: Apr 15, 2013 17:11:59 GMT -5
|
Post by justinbabcock1125 on Apr 19, 2013 22:40:30 GMT -5
What about lifter height same as when it was stock.004 on both?
|
|
Freshman Rider
Currently Offline
Posts: 67
Likes: 0
Joined: Apr 15, 2013 17:11:59 GMT -5
|
Post by justinbabcock1125 on Apr 19, 2013 22:39:26 GMT -5
Thats it so if its tdc is perfectly timed then?
|
|
Freshman Rider
Currently Offline
Posts: 67
Likes: 0
Joined: Apr 15, 2013 17:11:59 GMT -5
|
Post by justinbabcock1125 on Apr 19, 2013 21:49:15 GMT -5
Yes i work on stuff alot a impact is a tool i use alot
|
|
main jet an installed it i thinkbit might be to big but the main jet has no impact till u hit the gas correct?...an might inneed a more powererful battery now?
an a