New Rider
Currently Offline
Posts: 12
Likes: 0
Joined: Mar 16, 2013 12:50:42 GMT -5
|
Petcock
by: davidworley16 - Jul 19, 2013 9:54:26 GMT -5
Post by davidworley16 on Jul 19, 2013 9:54:26 GMT -5
Thanks everyone! I will post the outcome.  |
|
New Rider
Currently Offline
Posts: 12
Likes: 0
Joined: Mar 16, 2013 12:50:42 GMT -5
|
Petcock
by: davidworley16 - Jul 19, 2013 9:37:55 GMT -5
Post by davidworley16 on Jul 19, 2013 9:37:55 GMT -5
Can I run an inline manual petcock on a 50 cc scooter Taotao if I plug off the vacuum line normally hooked up to the vac operated original?  |
|
New Rider
Currently Offline
Posts: 12
Likes: 0
Joined: Mar 16, 2013 12:50:42 GMT -5
|
Post by davidworley16 on Jun 25, 2013 11:04:32 GMT -5
Thanks Great place to get what I need. Windshields Cool... |
|
New Rider
Currently Offline
Posts: 12
Likes: 0
Joined: Mar 16, 2013 12:50:42 GMT -5
|
Post by davidworley16 on Jun 25, 2013 10:57:27 GMT -5
Thank you I will check it |
|
New Rider
Currently Offline
Posts: 12
Likes: 0
Joined: Mar 16, 2013 12:50:42 GMT -5
|
top end Lube
by: davidworley16 - Jun 25, 2013 10:49:53 GMT -5
Post by davidworley16 on Jun 25, 2013 10:49:53 GMT -5
Would it hurt to use a upper cylinder lubricant? |
|
New Rider
Currently Offline
Posts: 12
Likes: 0
Joined: Mar 16, 2013 12:50:42 GMT -5
|
Post by davidworley16 on Jun 24, 2013 7:10:17 GMT -5
Need to R&R light bulb. Can find only on the net. Would like to replace with a commonly found unit/ socket and bulb. Anyone out there done this? A common unit that will fit into existing plastics as is, it is a 3 wire unit 35/50W. I would like to use LED if I could find the right unit. Cheep, no need to get expensive with cheep scoot such as this. |
|
New Rider
Currently Offline
Posts: 12
Likes: 0
Joined: Mar 16, 2013 12:50:42 GMT -5
|
Post by davidworley16 on Jun 18, 2013 12:21:26 GMT -5
Thanks This is what I figured,/ the carb is new, less than 50 miles. gravity fed. The stock carb did same thing once. I changed it out because I was afraid of running to hot. Hearing the jets might be to small and running lean. Coming up on valve adjust @ 500 mile. Oh and one more thing, the air fuel mix screw I was toying with on the intake manifold side, I ran it all the way in and the bike never cut off like I thought it should. Seems wrong from what I have seen here. Thanks for your time. |
|
New Rider
Currently Offline
Posts: 12
Likes: 0
Joined: Mar 16, 2013 12:50:42 GMT -5
|
Post by davidworley16 on Jun 18, 2013 9:44:32 GMT -5
I drink Community Coffee. It can now be purchased at some Walmart stores. It is a Co. out of Louisiana I used at my restaurant. Rail Road workers turned us on to it. it is no more expensive than Folgers coffee and Better tasting to many of my friends. It can be bought on line as well at communitycoffee.com |
|
New Rider
Currently Offline
Posts: 12
Likes: 0
Joined: Mar 16, 2013 12:50:42 GMT -5
|
Post by davidworley16 on Jun 18, 2013 9:20:49 GMT -5
I have a Taotao 50cc/ I ordered a replacement for the stock carb, went on fine but the needle valve gets stuck open on this one as well. Question is what can I do about this to prevent it, short of walking the bike up my street, and is there a better carb that will not cost the price of the bike? ;D
|
|
New Rider
Currently Offline
Posts: 12
Likes: 0
Joined: Mar 16, 2013 12:50:42 GMT -5
|
Post by davidworley16 on Apr 15, 2013 14:37:04 GMT -5
I think it says one set. Last I heard a set consists of more than one!  |
|
New Rider
Currently Offline
Posts: 12
Likes: 0
Joined: Mar 16, 2013 12:50:42 GMT -5
|
Post by davidworley16 on Apr 6, 2013 7:11:34 GMT -5
Never use fixaflat as a preventative there are products out there that are made for this not fixaflat!
:#
|
|
New Rider
Currently Offline
Posts: 12
Likes: 0
Joined: Mar 16, 2013 12:50:42 GMT -5
|
Missouri
by: davidworley16 - Mar 28, 2013 9:15:28 GMT -5
Post by davidworley16 on Mar 28, 2013 9:15:28 GMT -5
Jefferson City. Hi, I'm Dave |
|
