|
|
Post by tvnacman on Oct 3, 2014 8:31:38 GMT -5
what have you learned ?
John
|
|
|
|
Post by tvnacman on Oct 3, 2014 8:24:44 GMT -5
read the description here . John |
|
|
|
Post by tvnacman on Oct 2, 2014 4:27:34 GMT -5
what does the vendor say and where did you get it ? John f No returns on electronics. I was my fault for saying dc instead of ac from ScootsUsa. It was about $40 cheaper than the place you recommended. $40 cheaper for just the stator . Click click and you ordered it or did you talk to someone ? John |
|
|
|
Post by tvnacman on Oct 1, 2014 19:28:29 GMT -5
thats the power for the cdi , I cant see how it ran unless the pin is in the harness plug and just broke off .
John
|
|
|
|
Post by tvnacman on Oct 1, 2014 16:47:17 GMT -5
looks like the pin in the cdi is missing .
the engine damage has left foreign matter in there split the case .
John
|
|
|
|
Post by tvnacman on Oct 1, 2014 16:43:59 GMT -5
what does the vendor say and where did you get it ?
John
|
|
|
|
Post by tvnacman on Oct 1, 2014 12:08:09 GMT -5
You are going to need to flush the case to get rid of all the shavings from sawing out the piston. The last picture shows the crank covered in metal chips and flakes. You may even need to split the case to fully clean it all out. Safe bet is to split the case. John |
|
|
|
Post by tvnacman on Oct 1, 2014 11:58:40 GMT -5
Looks like Ac cdi , check the stator plug . Post pictures of all the wires .
John
|
|
|
|
Post by tvnacman on Sept 30, 2014 19:34:09 GMT -5
John and Linda are fine people .
John
|
|
|
|
Post by tvnacman on Sept 29, 2014 20:29:04 GMT -5
That's not good what does the vendor that you got it from say ?
John
|
|
|
|
Post by tvnacman on Sept 29, 2014 18:19:43 GMT -5
I would clean the carb , adjust the valves .
John
|
|
|
|
Post by tvnacman on Sept 28, 2014 10:13:37 GMT -5
recheck your mechanical timing ? your missing something , are you getting a strong cranking ?
John
|
|
|
|
Post by tvnacman on Sept 26, 2014 16:18:26 GMT -5
Doug , feel free to post here , or your welcome to call .
John
|
|
|
|
Post by tvnacman on Sept 26, 2014 7:08:53 GMT -5
When you installed the new coil, did you plug the wires in the same way as stock? On my orange coil, it wouldn't start until i plugged them in reverse (Black on green, green on black). Fired right up then. I have played around with this it did not make much difference . How are things going with this ? John |
|
|
|
Post by tvnacman on Sept 25, 2014 18:48:48 GMT -5
Welcome Cat!!!!!!!!
John
|
|
