|
|
Post by tvnacman on Jul 24, 2014 4:38:30 GMT -5
HAHAHA that is funny, Blac CALL JOHN he will set you straight and even guide you with the install. 347-654-1320 Alleyoop 347 564 1320 John |
|
|
|
Post by tvnacman on Jul 23, 2014 14:51:32 GMT -5
Better to ask then .
What did you want to know ?
John
|
|
|
|
Post by tvnacman on Jul 23, 2014 8:43:35 GMT -5
More so getting the plastics off . Are you having problems ?
John
|
|
|
|
Post by tvnacman on Jul 23, 2014 8:23:56 GMT -5
Prodigy has 16" , lets be sure check your tire size .
John
|
|
|
|
Post by tvnacman on Jul 23, 2014 5:36:38 GMT -5
What wheel size ?
John
|
|
|
|
Post by tvnacman on Jul 22, 2014 16:22:07 GMT -5
Have you contacted nycscooterparts.com yet . There is a guy there John he can help . You have nothing to loose .
John
|
|
|
|
Post by tvnacman on Jul 22, 2014 8:53:56 GMT -5
Check the stator s on nycscooterparts.com
John
|
|
|
|
Post by tvnacman on Jul 21, 2014 6:14:14 GMT -5
Welcome!!!!!!!
John
|
|
|
|
Post by tvnacman on Jul 19, 2014 10:29:57 GMT -5
yes the outter half stock is 115mm , the stock inner is 107mm . The performance variators you use with the stock outter/fan half and the inner is 115mm to match the stock 115mm outer .
John
|
|
|
|
Post by tvnacman on Jul 19, 2014 7:26:45 GMT -5
sometimes you need to prime the system with fuel . I have to prime mine if its been sitting a week or more . squirt some fuel in the vac line then crank it . It works like a charm everytime . You should check and adjust the valves too .
John
|
|
|
|
Post by tvnacman on Jul 19, 2014 5:31:43 GMT -5
I thought the battery was connected backwards and spinning the engine backwards . I was going to ask if it was just running backwards .
John
|
|
|
|
Post by tvnacman on Jul 19, 2014 5:27:01 GMT -5
can you look through the lens maybe post a pic of them .
John
|
|
|
|
Post by tvnacman on Jul 18, 2014 8:09:46 GMT -5
Open it up and check the bearings . I would check in the cvt first , tollers clutch pads ect...
John
|
|
|
|
Post by tvnacman on Jul 18, 2014 8:09:21 GMT -5
Open it up and check the bearings . I would check in the cvt first , tollers clutch pads ect...
John
|
|
|
|
Post by tvnacman on Jul 18, 2014 8:09:04 GMT -5
Open it up and check the bearings . I would check in the cvt first , tollers clutch pads ect...
John
|
|
