|
|
Post by tvnacman on Jul 13, 2015 6:48:32 GMT -5
overhauling the clutch is not all that hard or a big deal. This has a big impact on the cvt long term. Your just disassembling everything, cleaning off the surfaces. Lubing the pivot points, lubing the slides for the pulley sheaths. Cleaning out the old grease from the needle bearing packing with fresh grease. Clean the internal shafts and coat with grease. Remember to use high temp bearing grease so it does not run .
John
|
|
|
|
Post by tvnacman on Jul 11, 2015 9:49:36 GMT -5
what size wheels, two stroke or 4? If the clutches are overhauled before use they tend to last a very long time.
John
|
|
|
|
Post by tvnacman on Jul 10, 2015 13:40:47 GMT -5
how are you changing the belts? just forcing the belt over the pulleys?
John
|
|
|
|
Post by tvnacman on Jul 10, 2015 5:29:26 GMT -5
what kind of belts are you using?
John
|
|
|
|
Post by tvnacman on Jul 9, 2015 10:12:28 GMT -5
the c in cdi is capacitive , meaning the capacitor charges up with energy . a dc cdi's capacitor will charge up with ac voltage.
John
|
|
|
|
Post by tvnacman on Jul 8, 2015 21:25:25 GMT -5
the ac voltage is higher then the dc so it works for a short while. if you put dc in ac they burnout faster.
John
|
|
|
|
Post by tvnacman on Jul 8, 2015 12:39:05 GMT -5
They don't last long .
John
|
|
|
|
Post by tvnacman on Jul 7, 2015 6:23:20 GMT -5
adjust the valves
|
|
|
|
Post by tvnacman on Jul 2, 2015 9:31:19 GMT -5
see if the fan/flywheel is loose on the crank shaft.
John
|
|
|
|
Post by tvnacman on Jun 30, 2015 20:03:53 GMT -5
What size BBK did you try?
|
|
|
|
Post by tvnacman on Jun 28, 2015 6:39:32 GMT -5
I remember you had a ome charging problems. Whats up now? Is the fuel injection system failing?
John
|
|
|
|
Post by tvnacman on Jun 26, 2015 17:20:29 GMT -5
sorry to hear about your trouble, is that your name and number or is it his name and number?
John
|
|
|
|
Post by tvnacman on Jun 24, 2015 6:03:30 GMT -5
chances are that if you broke a belt the rollers came out of place in the variator.
John
|
|
|
|
Post by tvnacman on Jun 22, 2015 18:58:57 GMT -5
herethey fit on the carbs. There are cross members that might be in the way on some models. Then I have a shorter one that will clear.  John Hey John, do you have one of those for the 30mm carb? Thanks.  What is the diameter of the 30mm carb the air intake side? |
|
|
|
Post by tvnacman on Jun 22, 2015 8:59:01 GMT -5
Steve your going to have to open this engine up, this is the first I have seen or heard of on this engine number. I would explain this to your customer, if you order in a bbk and it does not match up its on there dime. This is an odd ball engine number.
John
|
|
