|
|
Post by JR on Apr 23, 2013 0:31:42 GMT -5
Actually I think he did take care of it. Things just happen, he did put 10,000 miles on it.
|
|
|
|
Post by JR on Apr 22, 2013 21:48:23 GMT -5
If you are not getting anything out of the bleeder valve you need to figure out why, is it somehow plugged?
A technique I have used is opening the valve with a clear hose on it going into a glass jar then pumping the brake adding fluid into the master cylinder as needed.
|
|
|
|
Post by JR on Apr 22, 2013 19:25:40 GMT -5
more amp hours is better if in doubt.
|
|
|
|
Post by JR on Apr 22, 2013 18:06:00 GMT -5
you can install a electric fuel pump and not have to worry about it.
|
|
|
|
Post by JR on Apr 22, 2013 17:49:51 GMT -5
I am not worried about what I am in it for, I new the possibilities but my personality is one that makes me always think it will be the easiest thing not the hardest. I still think for about $300.00 in parts I'll have it going.
|
|
|
|
Post by JR on Apr 22, 2013 14:11:25 GMT -5
I got up this morning and started on the scooter, not good news. I pulled the right side cover off and found lots of bits of metal in the oil and on the flywheel. Looks like I have to pull the motor and go through it.   There were really big chunks in the oil drain pan. |
|
|
|
RPMs
by: JR - Apr 22, 2013 13:07:00 GMT -5
Post by JR on Apr 22, 2013 13:07:00 GMT -5
|
|
|
|
Post by JR on Apr 22, 2013 10:52:37 GMT -5
It has been a while since I had a problem with dieseling, it seems that running too hot, as in coolant temperature, and timing advance being off can also cause it.
If it has a low octane fuel in it try adding a booster or some premium fuel.
|
|
|
|
Post by JR on Apr 22, 2013 10:07:10 GMT -5
Wind shear, it happens. Do you have the 10 inch wheel scooter? I think the larger wheel has less trouble with it, but a light vehicle is just more sensitive to the wind than a larger one is and scooters are about as light as they get.
|
|
|
|
Post by JR on Apr 22, 2013 0:19:00 GMT -5
Well I con't know on W7 on XP depending on my computer I am using, I have to press the Shift key OR the CNTRL key AND the Print Screen/Sys Rq key at the same time. I then open a photo editing software and open a new file then my software has me adjust the size of the new file and I can press the Edit button, scroll down to paste and I have a new photo file that can be cropped to size and modified in any way I want. I use a free program you can download called Gimp, it is close to the equivalent of Photo Shop it does take some learning.
Once you get a photo saved I suggest putting it in a word processing document for printing.
|
|
|
|
RPMs
by: JR - Apr 21, 2013 19:54:08 GMT -5
Post by JR on Apr 21, 2013 19:54:08 GMT -5
Well you can come by if you like.
|
|
|
|
Post by JR on Apr 21, 2013 19:30:52 GMT -5
The Honda Helix is ugly as . He must be talking about a Honda Reflex clone . You may not like the Helix but it has its fans. |
|
|
|
RPMs
by: JR - Apr 21, 2013 14:45:09 GMT -5
Post by JR on Apr 21, 2013 14:45:09 GMT -5
When I was looking for parts for the scooter I got from you I saw a list of weights for the cn250 that went up to 26 grams. The small one was 16 I think. I figured I would try the 20 if I replaced them.
I would think the variator would be interchangable but do not know for sure.
Earl one of the mods here has owned a coouple of them and I bet he would know. JR has the linhai motors in his I think.
|
|
|
|
Post by JR on Apr 20, 2013 21:10:46 GMT -5
I just want to thank you for living in Kentucky!
|
|
|
|
RPMs
by: JR - Apr 20, 2013 21:06:47 GMT -5
Post by JR on Apr 20, 2013 21:06:47 GMT -5
Skyrider Welcome, and again thanks for the scooter.
|
|
