|
New Rider
Currently Offline
Posts: 7
Likes: 0
Joined: Jul 23, 2015 4:33:46 GMT -5
|
Post by hawk on Sept 10, 2015 19:36:16 GMT -5
Wrong hands..... Left side is rear brakes and activates the light. Right side is front ABS disk brake. Is that correct, or should either brake activate the brake light? Extra photo:
|
|
|
Post by ghcoe on Sept 10, 2015 22:06:53 GMT -5
Both brakes should operate the brake light.
|
|
|
Post by hillbillybob on Sept 11, 2015 19:57:23 GMT -5
Since this isn't your first rodeo...so to speak, I have to believe you realize that a PDI, includes a lot more than just engine and gear oil changes. If one isn't performed, your scooter will never be dependable, and I doubt if it.will even be running in a thousand miles. But you already know this.......right?
|
|
New Rider
Currently Offline
Posts: 7
Likes: 0
Joined: Jul 23, 2015 4:33:46 GMT -5
|
Post by hawk on Sept 11, 2015 20:09:15 GMT -5
Where did my photos go? I saw the PDI videos on u-tube, some will be done soon. What does PDI stand for anyway?
|
|
Sophomore Rider
Currently Offline
Posts: 168
Likes: 30
Joined: Feb 26, 2013 15:44:08 GMT -5
|
Post by cookees on Sept 11, 2015 21:43:53 GMT -5
I believe you went from a SAAB to a Yugo.
|
|
New Rider
Currently Offline
Posts: 7
Likes: 0
Joined: Jul 23, 2015 4:33:46 GMT -5
|
Post by hawk on Sept 12, 2015 0:02:24 GMT -5
The TOMOS Targa LX was problematic and a maintenance hog. I could keep up with it until the throttle fell apart and the rear tire went flat again. No replacement available, I had to sell it to a guy with throttle.
This new ride has great storage in the glove box and below the seat, in the hot box. The ride is so much better with those fat tires. The speed is about the same, but the power is better.
The TOMOS Mopeds did not need any PDI and ran well from the start. What is P.D.I.?
Now I have a gas gauge and electric start. A CVT trans and ABS front brake. This is advanced technology for a $500 scooter. I am very pleased so far.
Can anyone see the photos that I promised? I can not see them as I view from work.
|
|
|
Post by rockynv on Sept 12, 2015 8:47:27 GMT -5
The P(re) D(elivery) I(nspection) is what the local dealer is supposed to do when he un-crates the bike and prepares it to be delivered to the customer. When you purchase a crated bike on the internet it is up to you to perform the PDI and initial setup tasks just like the mechanic at a local dealership would. The better job that is done on the initial inspection and setup the more reliable the bike will be.
Brake fluid should also be flushed and changed before running the bike for too long.
|
|
New Rider
Currently Offline
Posts: 7
Likes: 0
Joined: Jul 23, 2015 4:33:46 GMT -5
|
Post by hawk on Oct 10, 2015 20:24:46 GMT -5
O.K. Valves adjusted and brake lights work with both brake handles. This ride is great fun and is an industrial tool for for my many missions. With a box on the rack, I can eliminate all the litter in my neighborhood. A car is too big and a bicycle is too high to reach litter on the ground.
|
|