|
|
Post by florida on Jul 3, 2015 14:38:41 GMT -5
2011 gmw 50cc four stroke gy6 with pair system just taken off.
Im trying to install new fuel and vacumn lines and havent done this before. Need some help.
I removed pair emissions system. I put ncy plate over hole.
I dont know what to do now. Im confused about running the lines to proper fitting.
Lets start at the gas tank. The fuel line goes to inline fuel filter correct? And then to carb?
|
|
|
|
Post by JoeyBee on Jul 3, 2015 15:20:40 GMT -5
Yes. Fuel line runs from the tank petcock, inline filter, to carb.
From the intake manifold a vacuum line runs to the carb and tank petcock.
If you have a breather on the valve cover run some extra fuel line to a high point on the frame and place a fuel filter on the end. It's there just to vent an positive pressure from the motor into the atmosphere. The fuel filter on the end prevents dirt from getting into the motor.
Then your done. It's a very easy mod and your motor will thank you for it.
|
|
|
|
Post by florida on Jul 3, 2015 15:23:40 GMT -5
Is this intake manifold?  |
|
Freshman Rider
Currently Offline
Posts: 96 
Likes: 10
Joined: May 4, 2015 14:22:19 GMT -5
|
Post by nimajneb on Jul 3, 2015 15:27:36 GMT -5
No. the intake manifold is after the carb. should be black and connects the carb to the motor.
|
|
|
|
Post by florida on Jul 3, 2015 15:48:01 GMT -5
This is a part that i removed. Where does it go? I dont have a spare fuel filter to do the mod you mentioned.  |
|
|
|
Post by JoeyBee on Jul 3, 2015 16:05:22 GMT -5
This is a part that i removed. Where does it go? I dont have a spare fuel filter to do the mod you mentioned. That's an EVAP canister. It goes in the garbage. |
|
|
|
Post by florida on Jul 3, 2015 16:11:15 GMT -5
Ok, phew, i thought i was losing my mind!
Now what about the hole on the stock airbox?
Plug it up?
|
|
|
|
Post by JoeyBee on Jul 3, 2015 16:13:28 GMT -5
Ok, phew, i thought i was losing my mind! Now what about the hole on the stock airbox? Plug it up? Yeah.... Until your unifilter arrives in the mail. Then the air box goes into the trash also. |
|
|
|
Post by florida on Jul 3, 2015 16:17:53 GMT -5
Ok thanks for all your help.
|
|
|
|
Post by JoeyBee on Jul 3, 2015 16:22:24 GMT -5
I was hesitant at first to remove my airbox. But I'm very happy now that I did it. My scoot looks so much better with a unifilter.  |
|
|
|
Post by florida on Jul 3, 2015 17:21:58 GMT -5
I like your fender!
|
|
|
|
Post by murkyapricot on Jul 4, 2015 0:07:28 GMT -5
I was hesitant at first to remove my airbox. But I'm very happy now that I did it. My scoot looks so much better with a unifilter. taotao powermax? How long have you had it? The little metal decoration with the holes in it that u can see in that pic rusted on mine pretty quick |
|
|
|
Post by florida on Jul 4, 2015 0:18:53 GMT -5
Ok, phew, i thought i was losing my mind! Now what about the hole on the stock airbox? Plug it up? |
|
|
|
Post by JoeyBee on Jul 4, 2015 0:38:34 GMT -5
I was hesitant at first to remove my airbox. But I'm very happy now that I did it. My scoot looks so much better with a unifilter. taotao powermax? How long have you had it? The little metal decoration with the holes in it that u can see in that pic rusted on mine pretty quick Yeah, TaoTao Powermax 150. I've had it for about a year now. It gets parked in the garage, and I drive my truck on rainy days so it doesn't get wet very often. |
|
Freshman Rider
Currently Offline
Posts: 61
Likes: 3
Joined: Jul 9, 2014 11:56:23 GMT -5
|
Post by hunter on Jul 4, 2015 12:25:00 GMT -5
I've got a Powermax 150 too, love that thing. What'd you plug the line from your CVT into? I just put a uni filter on mine and wasn't sure what to do with that hose.
|
|
