|
|
Post by geh3333 on Jun 28, 2014 17:01:57 GMT -5
HAHAHAHA, clutch doesn't fully engage until 4000 rpms, I can see why they bust  Your a hotrod on that thing and running high rpms most of the time full out. Alleyoop Yeah your right I do run it hard , my clutch normally didn't engage that high , that's why I think my pads are wore causing the rpms to rise higher to throw the clutch arms out enough to engage . They should be full engaging near 3200 rpms with the 1500 rpm springs . I think the combination of that with my 210 lbs and a 2000 main spring is the cause . |
|
|
|
Post by rexxk on Jun 28, 2014 21:09:27 GMT -5
whatever then fine its cool. with me, its your bike. i did mention that the cvt is a system. systems dont, switch, without certain things. under certain conditions things have to be met.
your getting a new variator. thatll fix it. i dont know why them sliders break. its a good idea to check them every once in a while and repalce them. once they break, the variators shot. you where throwing more sliders at them and they where breaking over and over. guess what? you dont need to. do anything. get a new variator and use some quality brand sliders.
if a drive and driven pulley.. are together. their in a system. that's 2 different things. they need gaskets to be in a sytem together. thats why im calling them gaskets. they are, gaskets. the rear driven pulley, if you take it apart. where the 2 different ramps, slide apart, there are gaskets. on teh variator, it slides back and forth with, the ramp plate. and variator. lon the back, its the driven pulley, and torque converter. these things dont operate without, gaskets. the rear has gaskets between these. so does the front.
|
|
|
|
Post by rexxk on Jun 28, 2014 21:12:12 GMT -5
Yeah your right I do run it hard , my clutch normally didn't engage that high , that's why I think my pads are wore causing the rpms to rise higher to throw the clutch arms out enough to engage . They should be full engaging near 3200 rpms with the 1500 rpm springs . I think the combination of that with my 210 lbs and a 2000 main spring is the cause . I told you, that there are more torquey things out there. that use a cvt. |
|
|
|
Post by alleyoop on Jun 28, 2014 21:39:24 GMT -5
Geh3333, Are you listening, check those gaskets  |
|
|
|
Post by rexxk on Jun 29, 2014 12:46:16 GMT -5
you guys suggesting he should use a broke variator to everyone? if someone has a broke variator you think they should use it?
|
|
|
|
Post by jerseyboy on Jun 29, 2014 14:23:39 GMT -5
Geh3333, Are you listening, check those gaskets I looked but cant find mine,,guess they forgot to put em in  |
|
|
|
Post by rexxk on Jun 29, 2014 15:11:56 GMT -5
i suggest to go take a long walk off a short pier.
|
|
|
|
Post by rexxk on Jun 29, 2014 15:13:25 GMT -5
wow i can be around when something happens to get fixed so then I must know everything about scooters.
|
|
|
|
Post by rexxk on Jun 29, 2014 15:20:21 GMT -5
cant you guys speak for yourselves? use each other back and forth. alleys already made up lies trying to lie about me, hes constantly attacking me on everything i say. any help i give he acts like im doing something against him. so you guys keep your nose out of my business. im stating facts, things just dont work like magic. thsi didnt pop out of your.. and start dancing on a table in front of you. it uses ideas based on stuff discovered or FULLY EXPLAINED somewhere before. its not some mystic crap. ive fully explained myself. so get off of my back.im stating facts.
|
|
|
|
Post by rexxk on Jun 29, 2014 15:21:39 GMT -5
if you dont get it i dont care. dont start your little 2 yeard old insults, Cause it aint hard to do.. i dont need them. lets actually have a discussion on bikes, and mechanics , cause thats what inm intersted in. its why i post. if you cant do that, why dont you go get a beer from your fridge and turn your tv on and sit in front of it, no reason to sit at a computer with a keyboard.
i aint got no gaskets. oh haha. you mean as i said, no sliders and no o-rings in the driven pulley?
or is it called the magical works however i think it does type of system? fairies are keepign the metal to metal contact from happening? whats the sliders there for..?
lets see, ikn a mechanical operation which it is having to do, it makes it slide, easier.
yea thats a real technical term. easier. in mechanics, right that happens.
Ok welll thats enough ive shown my point.
|
|
|
|
Post by alleyoop on Jun 29, 2014 15:27:14 GMT -5
Rexxk.
We are just funning THERE are no GASKETS on the VARIATOR and OR THE CLUTCH. But then again we don't know what you are calling GASKETS, whatever you call gaskets in the Variator and Clutch are not gaskets .
Alleyoop
|
|
|
|
Post by rexxk on Jun 29, 2014 16:15:27 GMT -5
dsddddd ill leave this topic as is since noone is blind. i went over it already. twice. your ignoring me and trying to talk over top of me and your changing the subject. Im sick of this crap. you can explain the topic now.
|
|
|
|
Post by geh3333 on Jun 29, 2014 21:50:45 GMT -5
Rexxk. We are just funning THERE are no GASKETS on the VARIATOR and OR THE CLUTCH. But then again we don't know what you are calling GASKETS, whatever you call gaskets in the Variator and Clutch are not gaskets . Alleyoop Jesus chr-st , lol . I just read where u asked if I check those gaskets and u had me thinking " what gaskets in the variator ? " I didn't catch the sarcasm , lol |
|
|
|
Post by geh3333 on Jun 29, 2014 21:59:43 GMT -5
Rex I'm not running a broken variator , yes there was Some metal on metal contact but it wasn't that bad so I filed it to were I can still run it for now. Of course I am ordering a new one and a new ncy clutch and new v slider guides . I ran the scoot yesterday about 35 miles I haven't checked the v slides yet . I'm sure they are about shot they were half broken as it was .
|
|
|
|
Post by rexxk on Jul 1, 2014 1:16:11 GMT -5
Rex I'm not running a broken variator , yes there was Some metal on metal contact but it wasn't that bad so I filed it to were I can still run it for now. Of course I am ordering a new one and a new ncy clutch and new v slider guides . I ran the scoot yesterday about 35 miles I haven't checked the v slides yet . I'm sure they are about shot they were half broken as it was . quoting you. |
|
..BAD TO THE BONE..
