New Rider
Currently Offline
Posts: 49
Likes: 0
Joined: Mar 4, 2013 7:52:40 GMT -5
|
Post by imarider on Aug 7, 2013 18:39:27 GMT -5
Hi dawgs
What could cause a sudden drop in rpms. Also my performance dropped some too.
|
|
|
|
Post by jerseyboy on Aug 7, 2013 18:42:56 GMT -5
That could be alot of things,,we need more info.
Bad fuel would be my first guess If everything else is checking out ok like compression ect...
|
|
|
|
Post by ramblinman on Aug 7, 2013 18:59:15 GMT -5
is it also hard to start? recently my rpm's where all over the place and my scoot was difficult to start. my cdi was bad. i don't know how you test but if you have a spare lying around you could change it out and see if that solves the problem.
|
|
|
|
Post by millsc on Aug 7, 2013 19:03:42 GMT -5
Check to see if your filter is dirty
|
|
New Rider
Currently Offline
Posts: 49
Likes: 0
Joined: Mar 4, 2013 7:52:40 GMT -5
|
Post by imarider on Aug 7, 2013 19:22:31 GMT -5
Its not hard to start and I have had the same filter on it for over a year. It also loses alot of power going up hill. I'll have to check the filter tomorrow. I think I did get some bad gas last week when I almost ran out in my yard.
|
|
|
|
Post by scoots on Aug 7, 2013 19:28:29 GMT -5
ur jets in the carb may be dirty
|
|
|
|
Post by millsc on Aug 7, 2013 19:30:16 GMT -5
if you haven't cleaned the filter in a year its dirty lol  |
|
New Rider
Currently Offline
Posts: 49
Likes: 0
Joined: Mar 4, 2013 7:52:40 GMT -5
|
Post by imarider on Aug 9, 2013 16:56:09 GMT -5
Lol the jets weren't dirty. They were too small. I change the pilot jet and main this morning but I still have to change the main to a bigger jet. The fuel filter is clean and there was no dirt in it or the Carb.
|
|
|
|
Post by geh3333 on Aug 9, 2013 23:28:38 GMT -5
do u use sliders or rollers. if you use sliders they may b out of place
|
|
|
|
Post by jerseyboy on Aug 14, 2013 14:37:09 GMT -5
[replyingto=geh3333]geh3333[/replyingto]Yup,,they only work in one spot!
|
|
