Freshman Rider
Currently Offline
Posts: 80
Likes: 1
Joined: May 18, 2013 21:08:05 GMT -5
|
Inheritance
by: DJHypnotiq - May 19, 2013 14:45:21 GMT -5
Post by DJHypnotiq on May 19, 2013 14:45:21 GMT -5
|
|
|
|
Inheritance
by: domindart - May 19, 2013 17:50:05 GMT -5
Post by domindart on May 19, 2013 17:50:05 GMT -5
Looks like a beast~!  I didn't catch it, who gave you this, family member? |
|
Freshman Rider
Currently Offline
Posts: 80
Likes: 1
Joined: May 18, 2013 21:08:05 GMT -5
|
Inheritance
by: DJHypnotiq - May 19, 2013 19:02:12 GMT -5
Post by DJHypnotiq on May 19, 2013 19:02:12 GMT -5
wife picked this up off some freebie site. Tuesday when im off i'm going to start digging into it. today I just took the seat out to get a view of her insides and see what i'll be getting into. After my previous post she fired up for me took it a minute but she did. soon as I let go of the throtte she went dead on me.
|
|
|
|
Inheritance
by: domindart - May 19, 2013 19:04:00 GMT -5
Post by domindart on May 19, 2013 19:04:00 GMT -5
ah, i see
|
|
|
|
Inheritance
by: alleyoop - May 19, 2013 19:27:43 GMT -5
Post by alleyoop on May 19, 2013 19:27:43 GMT -5
One thing see the fuel line coming down to the Fuel Filter, that should NOT be lower than the Carbs Fuel Inlet. You have a Gravity fed fuel system so shorten that hose coming from the fuel tank and make it a straighter shot to the carb fuel inlet. You do not want anything lower than the fuel inlet on a gravity fed system.
I see it has a ground wire on the Valve cover top bolt make sure it is clean and clean where it attachs to the frame. If it has a bad ground to the motor it will not spark. Also make sure the killswitch is on the RUN POSITION and the SIDE STAND is up some have a killswitch on the Side stand and if it is down it will not spark.
Check those things and then either get a spare plug or take the one in there out and check for spark. Hold the plug against the valve cover and crank it and see if it is firing.
Alleyoop
|
|
Freshman Rider
Currently Offline
Posts: 80
Likes: 1
Joined: May 18, 2013 21:08:05 GMT -5
|
Inheritance
by: DJHypnotiq - May 19, 2013 19:28:04 GMT -5
Post by DJHypnotiq on May 19, 2013 19:28:04 GMT -5
ya still trying to figure out my model number and the such so when it comes time to order needed parts I can order the right items from wildfire
|
|
Freshman Rider
Currently Offline
Posts: 80
Likes: 1
Joined: May 18, 2013 21:08:05 GMT -5
|
Inheritance
by: DJHypnotiq - May 19, 2013 19:31:02 GMT -5
Post by DJHypnotiq on May 19, 2013 19:31:02 GMT -5
One thing see the fuel line coming down to the Fuel Filter, that should NOT be lower than the Carbs Fuel Inlet. You have a Gravity fed fuel system so shorten that hose coming from the fuel tank and make it a straighter shot to the carb fuel inlet. You do not want anything lower than the fuel inlet on a gravity fed system. I see it has a ground wire on the Valve cover top bolt make sure it is clean and clean where it attachs to the frame. If it has a bad ground to the motor it will not spark. Also make sure the killswitch is on the RUN POSITION and the SIDE STAND is up some have a killswitch on the Side stand and if it is down it will not spark. Check those things and then either get a spare plug or take the one in there out and check for spark. Hold the plug against the valve cover and crank it and see if it is firing. Alleyoop Thanx Alleyoop Tuesday that will be the first few items on my agenda. I read elsewhere you used a certain fuel filter but cant seem to find that post again |
|
|
|
Inheritance
by: alleyoop - May 19, 2013 19:32:35 GMT -5
Post by alleyoop on May 19, 2013 19:32:35 GMT -5
The motor is very common my own motor on the TRIKE is a 157QMJ they are great little motors, nothing special about them but you can mod them to the hilt  . Alleyoop |
|
Freshman Rider
Currently Offline
Posts: 80
Likes: 1
Joined: May 18, 2013 21:08:05 GMT -5
|
Inheritance
by: DJHypnotiq - May 19, 2013 19:48:29 GMT -5
Post by DJHypnotiq on May 19, 2013 19:48:29 GMT -5
glad I had a couple cans of brake cleaner around, took me a whole can just to clean the plate in order to post as much about her as possible
|
|
Freshman Rider
Currently Offline
2013 Jonway MC-D23 (Roketa Aruba)
Posts: 50
Likes: 0
Joined: Mar 8, 2013 21:07:10 GMT -5
|
Inheritance
by: dwayne1964 - May 19, 2013 20:20:21 GMT -5
Post by dwayne1964 on May 19, 2013 20:20:21 GMT -5
Good looking scoot. looks almost like my Roketa Bermuda.   |
|
Freshman Rider
Currently Offline
Posts: 80
Likes: 1
Joined: May 18, 2013 21:08:05 GMT -5
|
Inheritance
by: DJHypnotiq - May 19, 2013 20:23:14 GMT -5
Post by DJHypnotiq on May 19, 2013 20:23:14 GMT -5
it sure does. first glance I thought it was the same just different colors...
|
|
New Rider
Currently Offline
Posts: 17
Likes: 0
Joined: Apr 21, 2013 21:40:22 GMT -5
|
Inheritance
by: scooterrider - May 19, 2013 21:24:50 GMT -5
Post by scooterrider on May 19, 2013 21:24:50 GMT -5
How many miles are on her? It wouldn't hurt the check the valve gaps seeing how you have the seat off.
Was there old gas still in the tank? It mite need the carb cleaned as well.
|
|
Freshman Rider
Currently Offline
Posts: 80
Likes: 1
Joined: May 18, 2013 21:08:05 GMT -5
|
Inheritance
by: DJHypnotiq - May 19, 2013 21:41:56 GMT -5
Post by DJHypnotiq on May 19, 2013 21:41:56 GMT -5
4963 miles...hoping to get the model number of this thing so I can find out all of the specs so nothing gets screwed up
|
|
Sophomore Rider
Currently Offline
Posts: 128
Likes: 9
Joined: Apr 3, 2013 9:41:03 GMT -5
|
Inheritance
by: mrpalmetto - May 20, 2013 20:20:37 GMT -5
Post by mrpalmetto on May 20, 2013 20:20:37 GMT -5
Great looking scoot. I like that!
|
|
Freshman Rider
Currently Offline
Posts: 80
Likes: 1
Joined: May 18, 2013 21:08:05 GMT -5
|
Inheritance
by: DJHypnotiq - May 20, 2013 21:09:53 GMT -5
Post by DJHypnotiq on May 20, 2013 21:09:53 GMT -5
ty gotta get her runnin right...tomorrow im off so its time to get dirty. first time owning scooter so have a long rode ahead...glad to have found this forum. going to keep it all stock until I figure out the inner workings of it all
|
|
..BAD TO THE BONE..
