New Rider
Currently Offline
Posts: 45
Likes: 1
Joined: Apr 22, 2013 22:12:58 GMT -5
|
Post by eman on Apr 22, 2013 22:27:10 GMT -5
There's an aluminum part that is held by a bolt at the bottom of the engine. it has a small diameter hose going to it and it has what looks to be some sort of adjustment screw in it. The hose isn't connected to anything, possibly belongs on the charcoal cannister which is broken.
|
|
|
|
Post by millsc on Apr 22, 2013 22:28:50 GMT -5
post a pic could be the carb drain hose but without a pic couldn't say
|
|
|
|
Post by skuttadawg on Apr 22, 2013 22:34:48 GMT -5
Yes please take a picture for us to be certain as to what it is
|
|
New Rider
Currently Offline
Posts: 45
Likes: 1
Joined: Apr 22, 2013 22:12:58 GMT -5
|
Post by eman on Apr 23, 2013 8:09:05 GMT -5
|
|
New Rider
Currently Offline
Posts: 45
Likes: 1
Joined: Apr 22, 2013 22:12:58 GMT -5
|
Post by eman on Apr 23, 2013 8:16:37 GMT -5
Sorry about the previous failed attempt. It's the piece below the clamp with the brass screw. The hose attaches at the back behind the screw. Attachments:
|
|
|
|
Post by jeepsteve92xj on Apr 23, 2013 8:18:31 GMT -5
looks like the float bowl remote drain. turn ou tthe screw and gas will dribble out.
|
|
New Rider
Currently Offline
Posts: 45
Likes: 1
Joined: Apr 22, 2013 22:12:58 GMT -5
|
Post by eman on Apr 23, 2013 8:20:21 GMT -5
The other end of the hose isn't attached to anything, where should it go to? The charcoal cannister is where I'm guessing but it's broken and just hanging by a wire tie.
|
|
Sophomore Rider
Currently Offline
Posts: 174
Likes: 1
Joined: Mar 17, 2013 11:51:20 GMT -5
|
Post by indymoped on Apr 23, 2013 8:29:37 GMT -5
It doesn't go to anything. Its correct how it is. Sometimes there will be a metal clip on the front of the CVT cover to hold it from flopping around but it does not plug into anything. Its just so if you need to drain the gas out of your carb you can do so without spilling gas all over.
|
|
New Rider
Currently Offline
Posts: 45
Likes: 1
Joined: Apr 22, 2013 22:12:58 GMT -5
|
Post by eman on Apr 24, 2013 23:13:58 GMT -5
Where on the carb does it connect to? It has a hose on the back of it but the end isn't connected to anything.
|
|
|
|
Post by alleyoop on Apr 24, 2013 23:47:04 GMT -5
It attachs to the bottom of the carb: Alleyoop  |
|
New Rider
Currently Offline
Posts: 45
Likes: 1
Joined: Apr 22, 2013 22:12:58 GMT -5
|
Post by eman on Apr 26, 2013 21:34:12 GMT -5
OK, I used a mirror and looked at the bottom of the carb. There's a nipple on the bottom of the carb with nothing on it. Next to it on the fuel bowl is a brass screw which must be the fuel drain screw. I have a feeling the carb might have been replaced.
|
|
|
|
Post by scootnwinn on Apr 26, 2013 21:52:52 GMT -5
Someone had certainly had their hands in there
|
|
..BAD TO THE BONE..
