|
|
Post by millsc on Apr 22, 2013 22:11:14 GMT -5
take a vid of you cranking it
|
|
|
|
Post by millsc on Apr 22, 2013 22:15:22 GMT -5
include the hoses and carb area
|
|
Freshman Rider
Currently Offline
Posts: 67
Likes: 0
Joined: Apr 15, 2013 17:11:59 GMT -5
|
Post by justinbabcock1125 on Apr 22, 2013 22:17:20 GMT -5
How do i post it...im on mobile
|
|
|
|
Post by millsc on Apr 22, 2013 22:18:23 GMT -5
the roketa i traded for my t3 i have now did this everything was perfect was like my 40th bbk it wouldn't start even with a jump i changed the cdi it cranked right up, but i have tons of spare parts most don't have a bunch of stuff to swap
|
|
|
|
Post by millsc on Apr 22, 2013 22:19:11 GMT -5
you record it with your phone upload it to youtube and post the link
|
|
Freshman Rider
Currently Offline
Posts: 67
Likes: 0
Joined: Apr 15, 2013 17:11:59 GMT -5
|
Post by justinbabcock1125 on Apr 22, 2013 22:40:34 GMT -5
|
|
|
|
Post by millsc on Apr 22, 2013 22:41:20 GMT -5
it says video is private
|
|
Freshman Rider
Currently Offline
Posts: 67
Likes: 0
Joined: Apr 15, 2013 17:11:59 GMT -5
|
Post by justinbabcock1125 on Apr 22, 2013 22:41:50 GMT -5
I also swaped out cdi with my stock one when the vid was loading on youtube...no change
|
|
Freshman Rider
Currently Offline
Posts: 67
Likes: 0
Joined: Apr 15, 2013 17:11:59 GMT -5
|
Post by justinbabcock1125 on Apr 22, 2013 22:43:41 GMT -5
Idk how to change it ill look
|
|
|
|
Post by millsc on Apr 22, 2013 22:44:52 GMT -5
sent you a pm
|
|
|
|
Post by millsc on Apr 22, 2013 23:12:49 GMT -5
make sure you hooked the ground wires back up to the valve cover and or the flywheel cover
|
|
Freshman Rider
Currently Offline
Posts: 67
Likes: 0
Joined: Apr 15, 2013 17:11:59 GMT -5
|
Post by justinbabcock1125 on Apr 23, 2013 0:56:49 GMT -5
Its alive.... Very fast right up to 30mph still tho....an it sounds like a lifter needs adjusted again but ill mess with it tomorrow again ....i also have to give it full throttle to start....an need a higher cranking battery....next step that varitator restricter wash....if theres one in there
|
|
Freshman Rider
Currently Offline
Posts: 67
Likes: 0
Joined: Apr 15, 2013 17:11:59 GMT -5
|
Post by justinbabcock1125 on Apr 23, 2013 0:58:35 GMT -5
All thanks to millsc...thanks
|
|
Freshman Rider
Currently Offline
Posts: 85
Likes: 3
Joined: Mar 29, 2013 21:12:12 GMT -5
|
Post by rollbar57 on Apr 23, 2013 16:29:12 GMT -5
|
|
Freshman Rider
Currently Offline
Posts: 67
Likes: 0
Joined: Apr 15, 2013 17:11:59 GMT -5
|
Post by justinbabcock1125 on Apr 24, 2013 1:38:20 GMT -5
Now as for trany/rear end gear is a 50/16 a good rear end or if not what am i looking for?
|
|
