Freshman Rider
Currently Offline
Posts: 67
Likes: 0
Joined: Apr 15, 2013 17:11:59 GMT -5
|
Post by justinbabcock1125 on Apr 22, 2013 14:19:28 GMT -5
Ok back again ...im installing my 80cc bbk an my 80cc head has no way of attaching the silver tube coming off my valve cover that i belive is the egr valve. Im looking for away around it plz help me out...in detail would help best plz help.........2012 taotao atm-50 gy6
|
|
Freshman Rider
Currently Offline
Posts: 67
Likes: 0
Joined: Apr 15, 2013 17:11:59 GMT -5
|
Post by justinbabcock1125 on Apr 22, 2013 15:04:16 GMT -5
Can i simple attach everything an leave out the 2bolts that were there no holes from?
|
|
|
|
Post by millsc on Apr 22, 2013 15:19:52 GMT -5
Take the tube off and all hoses attached to it canister and all
|
|
|
|
Post by millsc on Apr 22, 2013 15:30:43 GMT -5
block the extra nipple on the manifold with a short hose and a bolt
|
|
Freshman Rider
Currently Offline
Posts: 67
Likes: 0
Joined: Apr 15, 2013 17:11:59 GMT -5
|
Post by justinbabcock1125 on Apr 22, 2013 15:45:08 GMT -5
If i take the tube off the bracket falls releaseing the hose bracket on the bottomwhich is attchet to my valve covertaking these offthese to expose flimsy valves attacted to my valve cover......
|
|
|
|
Post by millsc on Apr 22, 2013 15:49:00 GMT -5
take the two screws out of the u shape egr piece remove all of that stuff and the little rectangular piece inside, take all the hoses off the valve cover and the big unneeded egr hose and canister off and trash the stuff, you have a non egr head that stuff is unneeded
|
|
Freshman Rider
Currently Offline
Posts: 67
Likes: 0
Joined: Apr 15, 2013 17:11:59 GMT -5
|
Post by justinbabcock1125 on Apr 22, 2013 15:54:25 GMT -5
Will oil leak out the valve cover were every thing is conated tho?
|
|
|
|
Post by millsc on Apr 22, 2013 15:54:31 GMT -5
only hose attached to the valve cover will be the hose on top which is a vent
|
|
|
|
Post by millsc on Apr 22, 2013 15:55:34 GMT -5
once you get the stuff all off the valve cover you will see its still sealed i do this on every bbk i do
|
|
Freshman Rider
Currently Offline
Posts: 67
Likes: 0
Joined: Apr 15, 2013 17:11:59 GMT -5
|
Post by justinbabcock1125 on Apr 22, 2013 16:09:22 GMT -5
Thanks a bunch im ajout to try to start it up .....X-ed fingers
|
|
|
|
Post by millsc on Apr 22, 2013 16:09:55 GMT -5
will look like this when done except you dont need the block off plate since you have a non egr head now Attachments:
|
|
Freshman Rider
Currently Offline
Posts: 67
Likes: 0
Joined: Apr 15, 2013 17:11:59 GMT -5
|
Post by justinbabcock1125 on Apr 22, 2013 16:35:06 GMT -5
Ok well it didnt start....my battery died right away because it acted like it was hard to turnnover it kicks over way harder also.....batterys back on the trickle charger but i got spark an i here my exhaust chuging good an hard ...so ill spray it with starting fluid when my batterys charged a bit.....any other advice...also i order a  main jet an installed it i thinkbit might be to big but the main jet has no impact till u hit the gas correct?...an might inneed a more powererful battery now? |
|
|
|
Post by millsc on Apr 22, 2013 16:38:35 GMT -5
If its timed right, valves adjusted right and the battery is charged it should fire up especially with starting fluid, is big i run that jet in the 100cc kits with hipo exhaust, and open air filter and often its still slightly rich, but the main jet won't affect starting. Did you block the extra nipple on the manifold if you removed the epa crap? |
|
Freshman Rider
Currently Offline
Posts: 67
Likes: 0
Joined: Apr 15, 2013 17:11:59 GMT -5
|
Post by justinbabcock1125 on Apr 22, 2013 16:51:31 GMT -5
The etxra one like the hose that went to the air box...an the one coming off mycarb intake....then yes
|
|
|
|
Post by millsc on Apr 22, 2013 16:52:47 GMT -5
let it charge up and try it if its timed right it will fire up  |
|
main jet an installed it i thinkbit might be to big but the main jet has no impact till u hit the gas correct?...an might inneed a more powererful battery now?