|
|
BBK brands
by: pistonguy - May 31, 2018 10:32:56 GMT -5
Post by pistonguy on May 31, 2018 10:32:56 GMT -5
Ya, Ankle Bite it! All that cover does is keep fingers and pets out and then all the heat in necessitating the Drive face fan. Heat is the Enemy of the Belt...  |
|
|
|
BBK brands
by: pistonguy - May 31, 2018 10:34:36 GMT -5
Post by pistonguy on May 31, 2018 10:34:36 GMT -5
Ya may think not so well look. The Laser don't lie  |
|
|
|
BBK brands
by: uncleozzy - Jun 3, 2018 9:55:15 GMT -5
via mobile
Post by uncleozzy on Jun 3, 2018 9:55:15 GMT -5
My front wheel is off center from the accident. Can I straighten it out by the top two nuts above the bolt?
|
|
|
|
BBK brands
by: uncleozzy - Jun 3, 2018 9:56:16 GMT -5
via mobile
Post by uncleozzy on Jun 3, 2018 9:56:16 GMT -5
Where did you get that cvt cover?
|
|
|
|
Post by ricardoguitars on Jun 3, 2018 10:11:26 GMT -5
My front wheel is off center from the accident. Can I straighten it out by the top two nuts above the bolt? Try loosening the 2 bolts on the fork clamp, then move the fork to correct the alignment. |
|
|
|
Post by ricardoguitars on Jun 3, 2018 10:11:32 GMT -5
My front wheel is off center from the accident. Can I straighten it out by the top two nuts above the bolt? Try loosening the 2 bolts on the fork clamp, then move the fork to correct the alignment. |
|
|
|
BBK brands
by: uncleozzy - Jun 3, 2018 10:51:26 GMT -5
via mobile
Post by uncleozzy on Jun 3, 2018 10:51:26 GMT -5
Where are they located?
|
|
|
|
Post by uncleozzy on Jun 3, 2018 10:52:56 GMT -5
I'm a drummer by the way!!
|
|
|
|
Post by ricardoguitars on Jun 3, 2018 10:54:45 GMT -5
Follow the fork up and you will find them, you will have to take the front plastics off probably. |
|
|
|
Post by uncleozzy on Jun 3, 2018 11:06:53 GMT -5
Ok I know where they are. Thankyou God Bless!!
|
|
|
|
BBK brands
by: chewbaca - Jun 3, 2018 18:37:32 GMT -5
Post by chewbaca on Jun 3, 2018 18:37:32 GMT -5
its very probable that the fork clamps are bent
if they are it is never going to be the same as it was
you can however bend one side to match the other
it will work but the fork is weakened every time it is bent more
so I recommend shopping for and ordering a new tree
the shocks should be fine just watch for oil around the seals
and check you haven't broken a spring
|
|
|
|
BBK brands
by: uncleozzy - Jun 3, 2018 18:54:37 GMT -5
via mobile
Post by uncleozzy on Jun 3, 2018 18:54:37 GMT -5
Will do!! Thanks Chewy.
|
|
|
|
BBK brands
by: uncleozzy - Jun 5, 2018 10:24:04 GMT -5
via mobile
Post by uncleozzy on Jun 5, 2018 10:24:04 GMT -5
My variator belt got shredded and broken the pully didn't close after I reinstalled it. Anybody know why that happens?
|
|
|
|
BBK brands
by: uncleozzy - Jun 6, 2018 9:50:44 GMT -5
via mobile
Post by uncleozzy on Jun 6, 2018 9:50:44 GMT -5
It doesn't seem that the spring could be in the wrong way?
|
|
|
|
BBK brands
by: uncleozzy - Jun 6, 2018 9:56:19 GMT -5
via mobile
Post by uncleozzy on Jun 6, 2018 9:56:19 GMT -5
Does a 1500k tourque spring with 2k clutch springs do anything for performance?
|
|
