|
Post by pistonguy on Sept 13, 2018 10:32:53 GMT -5
Looking at where the carb is attached to the cylinder there is a four screw plate, am I right in thinking this is the reed valve. If so I will order a new one somehow, the problem with Senda's are their are two many models to choose from. Yes pull off that Four Screw plate and the Reed Cage is behind there.
|
|
|
Post by pistonguy on Sept 13, 2018 8:13:04 GMT -5
Im having bit of trouble determining if she is a Piston Port or Reed Valve motor. Im thing Reed Valve. Check them, hers how they work and how to check them
|
|
|
Post by pistonguy on Sept 12, 2018 22:26:13 GMT -5
Ok a White plug is indicating a Lean condition. You may have a air leak.. How many miles on the bike? How well does the bike start from cold? good? bad? take awhile or?
|
|
|
Post by pistonguy on Sept 12, 2018 21:56:40 GMT -5
IMHO, OCG is not in any way "chest thumping" or bragging - he is sharing stories of his life. If you do not like them, please do not read them - it is really that simple. There is a magazine called "Reminisce" that has articles like what OCG writes. Perhaps Leo should submit some articles/pictures to them as well? A more appreciative and forgiving audience there, I am sure... Accuracy and specificity are fine for a post that is trying to solve a problem, but this is fun stuff in the non-scooter area - no martinets here, please... If we insisted that every word submitted to "scrabble 5 letters" actually BE a word, where would we be? ;-) I don't give a crp about a little extra icing with some Whipped Cream and a Cherry on top but how about keeping it within the realm of reality? If its not catching the hand guards of a AR on fire in semi-auto form or a tinny person standing on the gas tank waking the throttle with there other foot and surfing a supposed 250 hp bike without a wiggle or the. or Neutral drops by hand, de Chipped by 250hp or so Honda, thats impossible to do even with todays engine management systems . just all bs.
|
|
|
Post by pistonguy on Sept 11, 2018 22:55:34 GMT -5
Ive made numerous trips to Watson's, they have been contracted by Honda to do the Honda pace cars and safety car builds, These cars have been completely disassembled to "Body in White" on a cart, Ive had my hands on them, you don't have one of them. www.watsonracing.com/
|
|
|
Post by pistonguy on Sept 11, 2018 22:48:42 GMT -5
FYI ill help ya out ,Real race cars IMSA or SCCA have to have certified cages and have them certified every year they race along with the seats in the cars. that are going to have full harness set ups. maybe you have a SCCA parking lot autocross racer that doesn't require the certs. A 490 or 500hp Accord fits no racing classes in IMSA or SCCA. This is a Sparko race seat from one of Bobby Archers Vipers I made into a office chair, see the Cert sticker on the side? Show us yours... The cars are Chassied and no such things bolt in roll cages that can be unbolted , the car would have to be disassembled and the Cage cut out. and to give you something to do you can look up the rider # and name of the KX in the background..
|
|
|
Post by pistonguy on Sept 11, 2018 22:29:36 GMT -5
I and others have had a exhausted search of the UEX and can find anything. so Find it and Post It, Document it. Now.. show us please! Jump on this Honda board and show us honda-tech.com/forums/road-racing-autocross-time-attack-19/2004-uex-accord-factory-racer-3323343/I will enjoy eating the Crow.. Document anything,I can't find a darn thing on Triangle. show us! And no Chopper I want to race that fictitious Honda factory racer, what a wussy way to get out of a call out, heck bring your outlaw biker buddies that don't exist to protect you. I will come alone. Or if to wussy to do Luna road lets do Denton. northstar-dragway.com/index.htmlI don't care were its I'm going to drag your arse. for somebody who made so much money as a teen street racer you wussy out pretty easy, cuz you were never one.. And to threaten me with a attorney. . I also have never stated that I own a Piston business or work at one or have worked at one. for the record I have worked for four different Piston companies, left them nine years ago and was recruited to a valve train business in NC.
|
|
|
Post by pistonguy on Sept 11, 2018 22:20:57 GMT -5
Hey piston--why are you bothering to read these? You've already established you don't believe Leo's stories. You think he's wrong. Ok. Fine. We get it. But you know what? I. DON'T. CARE.He's telling what he remembers. Sometimes memories aren't accurate. So what? Did you call your own uncle a liar when he either misremembered or embellished facts telling a story from his past? You've never ever embellished a story to make it better telling to your buddies? Just because you think you know otherwise, doesn't make it right for you to get all puffed up about what Leo is telling. Let him tell his tales. If they so offend you, well you know, nobody makes you click on this thread and read them. >K Ok yelling in Red... cute. You like my own mother you don't know a spark plug from a drain plug. you have no clue.. You are the least competent person on this board to weigh in. You do nothing but provoke and instigate his bs, Oh Unca Leo tell us more stories of the factory Honda racer that doesn't exist.. how revolting! you pander to it and Stroke Leo's Ego.. Snit you don't even ride, oh I hurt my thumb or whatever and can't ride for a year and a half, deal with it Tootsie.. Any of us for real who's works for real builds can never forget the details, it impossible.. and the numbers are so all over the board its pure bunk. Nothing more annoying in the industry is to meet someone and they have to tell the story of "I had this bike that was so fast" Oh ya we have spent out lives working with that bike from stock to wild. bs that what it is.. I come on there boards to help people with my areas of expertise, thats it, no chest pounding of who I am and what I have accomplished. A total Squid Poseur thing to do on a Scooter board.. Chopper has found a willing audience on a Scooter board to pound his chest. why not on the Harley boards? why not on the Honda race car boards? because they would have his bs for breakfast and told to Go Away with it. Nothing to contribute other than Look at Me.. honda-tech.com/forums/road-racing-autocross-time-attack-19/2004-uex-accord-factory-racer-3323343/Read it....
|
|
|
Post by pistonguy on Sept 11, 2018 8:06:56 GMT -5
Is there anyone still on this thread that can help me out!? Just bought a used yx127cf for $500, thought I was getting a good deal.. repaired the carb and replaced the battery, had it running good and put around 100miles on it before it starting having idle issues. Now I can't get it to stay running or idle at all. I've replaced the carb with a PZ19, installed a new fuel filter and new spark plug and I'm at a loss. The new carb is clean and functioning right as far as I can tell, I believe the valves are holding compression as well, I could definitely use some advice if available. Has anyone went through any similar issues and also where or how do I find parts.. Thanks in advance! Ill sure try How many total miles on her. can you take a picture of the motor so maybe we can cross over some parts for you. Confirm 100% she is getting fuel and spark.. You should highly consider renting or borrowing a Compression tester from the local parts stores.
|
|
|
Post by pistonguy on Sept 10, 2018 7:56:05 GMT -5
And in the end. Im comin for ya. Im a real man and I will save any direct character assignation or insults to your face. You your mouth and the 500hp "Little Hamster" to Luna road. Only on Luna road as your Trailer park under DF dub has the largest concentration of Sex offenders in Grapevive Texas. This is no longer funny. You called me a SOCIOPATH on ScooterRebels and that crossed the line, not only morally but legally. I forwarded that to my attorney and after laughing at the stupidity of it, asked if I'd like to own a business selling pistons. He also advised me take you as a personal threat and act accordingly. Advice duly noted and taken. Now, real man... So you're coming for me and post it on a public forum? At 71, I certainly don't street race except for fun stuff with the locals, I'm too old for hand-to-hand combat anymore, so I assume you want a lethal confrontation. OK. I no longer consider you simply a pest, but a threat to me and my family. THAT is a whole different situation. You've pushed the envelope way beyond what a stable person ever would. I don't know what is wrong with you, hijacking others' posts to start a feud, but YOU started it. YOU escalated it beyond all common sense. I take it seriously. Moderators please take note. This is no longer funny. No smiley faces, no trash talk, no joking. Either muzzle it, or this idiot is bound to pay me a visit, and it's going to end very permanently for one of us. That is fine. But it's not something I encourage or look forward to; just unpleasant business that can't be avoided... nor is this trash fit for a family-friendly public forum. Leo PS: for the record, you once again got it wrong (about the car). Lil' Rhonda is downtuned to 256hp as I've also mentioned in past posts. However, you do have it right about the sex offenders in my park. I've checked that out too. Congratulations on getting something right. and I'll gladly deal with them every time over dealing with your kind. You can have my Piston business that doesn't exist. Cant even handle a Call out to Luna road For the Record you have no Record on the Little Hamster. you stated on the Rebel you did the research on the Honda car collector forum and there is no such thing, Here all you had was the Salesman told ya so, so I'm calling bs every time you throw this out...
|
|
|
Post by pistonguy on Sept 9, 2018 22:32:51 GMT -5
And in the end. Im comin for ya. Im a real man and I will save any direct character assignation or insults to your face. You your mouth and the 500hp "Little Hamster" to Luna road. Only on Luna road as your Trailer park under DF dub has the largest concentration of Sex offenders in Grapevive Texas.
|
|
|
Post by pistonguy on Sept 9, 2018 22:23:38 GMT -5
A open invite to the Rock www.amraonline.com/Marty owns the series. I have the key to the front door at the Rock.
|
|
|
Post by pistonguy on Sept 9, 2018 22:19:10 GMT -5
Ill help ya out with some Piedmont history.. See this guy? and as you have referred to me as some one who just doesn't get Horse and Buggy tech of how to build hp with simple displacement Insulting, but I don't even get my panties in a wad I just laugh it off. Ohh know who is this Huh?? Jay is in the Hood and I moonlight with his Brother Bubba T who drive a Pro-Mod. There parents were educators, and as educators they had the summers off so they bought and own Piedmont for 35 years. Moonlighting helping this guy, so if you want a lesson in Drag Racing Unca is the best there is.
|
|
|
Post by pistonguy on Sept 9, 2018 22:06:10 GMT -5
thompsonracewaypark.com/So in the 440, this wed the 12th, invitation only, the 440 top 25 bring the 500hp "Little Hamster" and your wallet. This is invitation only from 11am till 5pm. I will cover the $60. Not hard to find me. Im in the Silverado pitted by Huck in the 55 Pro Street chevy a genuine Nam vet who for real raced Fuel HD from Nam till 2ooo. and is laughing at the 409 pistons Once back in the 336. you can call me out to Piedmont any open Thursday and don't forget your wallet.
|
|
|
Post by pistonguy on Sept 9, 2018 21:37:54 GMT -5
And at the moment I'm in the 440 helping out m eighty five year old Mom And I posed a question to Mom, at 17 years old how much do you think this guys weights? She's like a for real 190- 200, 225 maybe, then I told her you were supposed 350 or 370 or 375 again depending what post or board. And her words "What? Why doesn't anyone call him out on this?" Thats your picture on my computer. PRICELESS!!!!!!!!!!!!! Ya gott love a Slovak, both her parents and as my grandparents were born in Slovakia and as you see speak more words with there hands then there mouths...
|
|