New Rider
Currently Offline
Posts: 7
Likes: 0
Joined: Apr 9, 2013 8:20:50 GMT -5
|
Post by hawgstompr on Apr 9, 2013 14:03:38 GMT -5
I have a 2005 qingqi scooter(d1e41qmb motor) that i've been tinkering with for a while now. Last summer, i put a tb60 bbk on it and replaced the carb and clutch. It seemed to run fine, but i didn't ride it much until recently. Lately, it seems to sputter and intermittently loose power once it hits a certain rpm(usually around 25 mph depending on road grade, not sure the actual rpm). If it can mke it past that 'hump' it seems to run like a champ. Anybody have any ideas? Im pretty new to scoots, but seem to know more about them then anyone i know, so any help would be greatly appreciated. Thanks
|
|
|
|
Post by teddy554 on Apr 9, 2013 20:14:39 GMT -5
Clean the carb lately or change the spark plug
|
|
|
|
Post by domindart on Apr 9, 2013 20:19:44 GMT -5
Maybe put some seafoam in the gas?  |
|
|
|
Post by alleyoop on Apr 9, 2013 20:55:28 GMT -5
|
|
New Rider
Currently Offline
Posts: 22
Likes: 0
Joined: Mar 26, 2013 22:32:30 GMT -5
|
Post by wiscompton on Apr 12, 2013 18:40:33 GMT -5
Not sure how much faster than 25 those can go.
I have seen a couple of those where people got going down a hill, got going 35mph or so and just destroyed the plastic gears under the kicker cover.
|
|
New Rider
Currently Offline
Posts: 7
Likes: 0
Joined: Apr 9, 2013 8:20:50 GMT -5
|
Post by hawgstompr on Jul 22, 2013 13:50:38 GMT -5
Yeah, the one plastic gear in it just shredded.. when I opened the cover it was a pretty nasty sight. I was thinking maybe stiffer clutch springs would help prevent this, but the only site I found them on no longer carries parts for my scoot. If I could find the stiffer springs, would it be worth trying?
|
|
|
|
Post by scootnwinn on Jul 22, 2013 14:06:31 GMT -5
That thing really has plastic gears??? That I have never seen
|
|
New Rider
Currently Offline
Posts: 7
Likes: 0
Joined: Apr 9, 2013 8:20:50 GMT -5
|
Post by hawgstompr on Jul 22, 2013 18:38:02 GMT -5
Just one. Trying to post a picture, but its saying the file is to large
|
|
New Rider
Currently Offline
Posts: 7
Likes: 0
Joined: Apr 9, 2013 8:20:50 GMT -5
|
Post by hawgstompr on Jul 22, 2013 18:45:34 GMT -5
|
|
Sophomore Rider
Currently Offline
Posts: 117
Likes: 0
Joined: Mar 13, 2013 19:46:35 GMT -5
|
Post by pgs on Jul 26, 2013 21:50:55 GMT -5
|
|
New Rider
Currently Offline
Posts: 2 
Likes: 0
Joined: Jul 31, 2015 19:08:31 GMT -5
|
Post by bigkrumm on Jul 31, 2015 19:18:28 GMT -5
I have the same moped and engine I bought a new carb a new spark plug and a new big bore kit because that's all u can get but it won't start. It did b on the old cylinder and piston only with kicking it though and it's the same thing now it'll start by kicking it but it won't by electris starting it. Need help asap
|
|
|
|
Post by pistonguy on Aug 12, 2015 7:16:15 GMT -5
I have the same moped and engine I bought a new carb a new spark plug and a new big bore kit because that's all u can get but it won't start. It did b on the old cylinder and piston only with kicking it though and it's the same thing now it'll start by kicking it but it won't by electris starting it. Need help asap If ya got Compression and Spark spray it with Starting Fluid ( Ether) or some use Carb Cleaner like Gumout. Should start ruth up. if it does start on Ether that just told you she's not getting fuel. good luck |
|
..BAD TO THE BONE..
