|
|
Post by sailracer on Sept 30, 2013 12:56:37 GMT -5
I just tried that, and it registers me as a new account. Is there a way to save all messages from here or do we have to create an account, because I already deleted the new account. It doesn't let me sign in with existing .login  |
|
|
|
Tires
by: sailracer - Sept 30, 2013 12:06:27 GMT -5
Post by sailracer on Sept 30, 2013 12:06:27 GMT -5
Just use common sense and good judgement and do'nt over-analize the subject! when it's time to replace the tires, replace them !It's as simple as that  |
|
|
|
Post by sailracer on Sept 30, 2013 11:57:07 GMT -5
wont work for me either
|
|
|
|
Post by sailracer on Sept 30, 2013 8:39:01 GMT -5
Now there's floating x boxes
|
|
|
|
Post by sailracer on Sept 30, 2013 8:37:51 GMT -5
Groucho
|
|
|
|
Post by sailracer on Sept 30, 2013 8:27:36 GMT -5
Get rid of the 23mm carb. It's too big for a 50, I had one, went to an 18mm, and it makes all the difference in the world.They sell those things for special big valve ported heads.If you still have the original carb, try it out, you can always upjet it
|
|
|
|
Post by sailracer on Sept 29, 2013 18:15:24 GMT -5
That's what's great about this board  |
|
|
|
Post by sailracer on Sept 29, 2013 16:53:20 GMT -5
That's your opinion,and you're entitled to it.As the name states, I am constantly on the (salt) water,along with all my equipment, and I find PB blaster to be inferior to the others ;D different strokes  |
|
|
|
Post by sailracer on Sept 29, 2013 15:16:32 GMT -5
Your local plumbing supply house might have nipple extractors they are used to remove broken peices of pipe from fittings. Soak it for a long time with wd40 or kroil before attempting to remove it again.Or you might find a big enough easy-out
|
|
|
|
Post by sailracer on Sept 29, 2013 15:12:12 GMT -5
You need new roller weights
|
|
|
|
Post by sailracer on Sept 29, 2013 15:09:43 GMT -5
trespassing prohibited
|
|
|
|
Post by sailracer on Sept 29, 2013 14:21:05 GMT -5
That explains some of it. Take a look at his first picture. I don't know if it's the camera or what, But if you look at the upper left of the housing, that bearing looks undersized. He also stated that it was too small in his, So maybe the 6303 will fit. I gave him enough links that he should have no problem getting one.
|
|
|
|
Post by sailracer on Sept 29, 2013 11:17:26 GMT -5
The bearing in the gearbox was too small? Mic. the gearbox bearing housing, and post a pic. I'm thinking your supplier had the right one. In your pic, the bearing looks too small for the case.
|
|
|
|
Post by sailracer on Sept 29, 2013 8:37:54 GMT -5
|
|
|
|
Post by sailracer on Sept 28, 2013 19:27:46 GMT -5
|
|
jet