New Rider
Currently Offline
Posts: 16 
Likes: 0
Joined: Jun 8, 2015 9:57:23 GMT -5
|
Post by mobgod on Jun 29, 2015 13:11:25 GMT -5
Thanks Steve so just don't even fix it because I think it needs to be welded correct?
|
|
New Rider
Currently Offline
Posts: 16
Likes: 0
Joined: Jun 8, 2015 9:57:23 GMT -5
|
Post by mobgod on Jun 29, 2015 12:10:04 GMT -5
Someone tried to steal my taotao speed 50 seems to me they busted the lock for the steering anyway to fix that so it will lock?
|
|
New Rider
Currently Offline
Posts: 16
Likes: 0
Joined: Jun 8, 2015 9:57:23 GMT -5
|
Post by mobgod on Jun 17, 2015 13:09:31 GMT -5
I had an issue last year where I kept blowing my high beam, turned out my R/R was bad. Replaced it and I haven't had any issues since. So replace my R/R what is that and where can I get one? |
|
New Rider
Currently Offline
Posts: 16
Likes: 0
Joined: Jun 8, 2015 9:57:23 GMT -5
|
Post by mobgod on Jun 16, 2015 10:12:31 GMT -5
|
|
New Rider
Currently Offline
Posts: 16
Likes: 0
Joined: Jun 8, 2015 9:57:23 GMT -5
|
Post by mobgod on Jun 16, 2015 8:43:56 GMT -5
"The filament burned out on my low beam last season" mine too so i went with an h4 bulb,,,much better Does the h4 just go right in or do I need to make a any mods for this? "The filament burned out on my low beam last season" mine too so i went with an h4 bulb,,,much better |
|
New Rider
Currently Offline
Posts: 16
Likes: 0
Joined: Jun 8, 2015 9:57:23 GMT -5
|
Post by mobgod on Jun 15, 2015 23:13:16 GMT -5
I'm going crazy got a 2015 taotao 49cc lowbeam is fine now my high beam will not work, seems like this happend after the bbk was installed my buddy now has the same issue after the install of a bbk what could be the issue? All you did was install the bbk ? What other mods ? Did you remove the engine from the scoot ? No I did not |
|
New Rider
Currently Offline
Posts: 16
Likes: 0
Joined: Jun 8, 2015 9:57:23 GMT -5
|
Post by mobgod on Jun 15, 2015 21:28:43 GMT -5
I'm going crazy got a 2015 taotao 49cc lowbeam is fine now my high beam will not work, seems like this happend after the bbk was installed my buddy now has the same issue after the install of a bbk what could be the issue?
|
|
New Rider
Currently Offline
Posts: 16
Likes: 0
Joined: Jun 8, 2015 9:57:23 GMT -5
|
Post by mobgod on Jun 10, 2015 21:22:39 GMT -5
you can buy the 150 twin that looks exactly like the 50 and quit dicking around. Thanks but that means I need to get it registered and insurance |
|
New Rider
Currently Offline
Posts: 16
Likes: 0
Joined: Jun 8, 2015 9:57:23 GMT -5
|
Post by mobgod on Jun 10, 2015 15:19:53 GMT -5
Yes. If I take the head nuts off, I check/adjust my valves everytime after the nuts get torqued back down. Could that be the reason why it seems like the timing is off? |
|
New Rider
Currently Offline
Posts: 16
Likes: 0
Joined: Jun 8, 2015 9:57:23 GMT -5
|
Post by mobgod on Jun 10, 2015 11:04:30 GMT -5
If you can get a better angle on the cam holes (side angle) and maybe some light or something on the flywheel "T" mark, that'd be great because I can't make a whole lot out of either pic, really. I can't see if the cam is a tooth off at that angle, and I can't see the "T" mark on the flywheel to see if it lines up with the notch on the engine. What does "slip" mean? Crazy question was I suppose to adjust the values also? Could that be the issue? |
|
New Rider
Currently Offline
Posts: 16
Likes: 0
Joined: Jun 8, 2015 9:57:23 GMT -5
|
Post by mobgod on Jun 10, 2015 10:35:28 GMT -5
Slip meaning when I try to use the kick start feels like they're is a miss like a jump. I'll get pics in a few thanks guys
|
|
New Rider
Currently Offline
Posts: 16
Likes: 0
Joined: Jun 8, 2015 9:57:23 GMT -5
|
Post by mobgod on Jun 10, 2015 0:43:13 GMT -5
|
|
New Rider
Currently Offline
Posts: 16
Likes: 0
Joined: Jun 8, 2015 9:57:23 GMT -5
|
Post by mobgod on Jun 9, 2015 23:39:13 GMT -5
You can buy a bigger carb to go with the BBK, it is less restricting than stock. go with 17-19mm carb. Thanks can you help with one last thing how do I set the timing please |
|
New Rider
Currently Offline
Posts: 16
Likes: 0
Joined: Jun 8, 2015 9:57:23 GMT -5
|
Post by mobgod on Jun 9, 2015 22:09:45 GMT -5
Do we have a racing carb for a 49cc speed 50 taotao? I do have a bbk looking to see what else I can do.
|
|
New Rider
Currently Offline
Posts: 16
Likes: 0
Joined: Jun 8, 2015 9:57:23 GMT -5
|
Post by mobgod on Jun 8, 2015 13:32:09 GMT -5
Depending on your style of scooter, you may have to remove the whole front clip to get to the lights. I have a Jonway scooter and to get to my headlights I have to remove the front clip in order to be able to service them. As for putting in an led light should be able to. What model and year of scooter do you have and one of the peeps on here should be able to tell you what will work and the best way to install. Got a taotao speed 50 just came back from auto zone and they didn't have the bulb looks like its a s2 any kit I can use to change it? |
|
