New Rider
Currently Offline
Posts: 8
Likes: 0
Joined: Dec 19, 2014 20:02:59 GMT -5
|
Post by isaacbaker64 on Aug 5, 2016 23:51:05 GMT -5
Okkkkk solution found the vaccume line was not sealed hardly at all on the intake tit i first got a ziptie and cranked it to with fingers that made it burp on normal turn over... A good sighn usualy had to stomp like to get it running with kickstart (yes bad i know the teeth are weak and will break off) so i usualy started with car cuz i killed batt starting. When i put a plier on it it allowed it to be semi normaland run a min when the line got hot it sealed from the pressure and bike ran great but was burping a lot and bogging on take off(still does this some with new ziptied 1/8 line wondering why) anyway got some 1/8 inch line and it is bogging verry rairly also if it matteres i got a recurring loose muffler at engine using 1/4 on all connections but intake to mikuni pump thingy thats 1/8 as mentioned before spark plug is tight and plugwire dosent read spark on tester but it runs so it must be working
|
|
New Rider
Currently Offline
Posts: 8
Likes: 0
Joined: Dec 19, 2014 20:02:59 GMT -5
|
Post by isaacbaker64 on Aug 4, 2016 16:48:02 GMT -5
Got a custom icebearmaddog that is havi g a no gas issue... Yes i adjusted valves still no gas it cant pump uphill... Thats the whole issue what can i do beside ride the damn gastank in my lap i even got a mikuni and still having issues but i did see the mikuni work with the send line off but its intermittent
|
|
New Rider
Currently Offline
Posts: 8
Likes: 0
Joined: Dec 19, 2014 20:02:59 GMT -5
|
Post by isaacbaker64 on Jul 27, 2016 23:23:12 GMT -5
Wonder if the intake manifold is split as it not idling is identical to my Taotao50 that just was fixed with that issue
|
|
New Rider
Currently Offline
Posts: 8
Likes: 0
Joined: Dec 19, 2014 20:02:59 GMT -5
|
Post by isaacbaker64 on Jul 21, 2016 14:11:24 GMT -5
Found it during the rain its a vaccumw leak in the case prollyvnothing i can do also i do think valves are off atad... Y does it need 7turns out on carb to run tho and a fuel pump to stay running
|
|
New Rider
Currently Offline
Posts: 8
Likes: 0
Joined: Dec 19, 2014 20:02:59 GMT -5
|
Post by isaacbaker64 on Jun 29, 2016 23:16:07 GMT -5
Alrighty prollybwrong place for this. my name is isaac i live in brunswick ga i bought a icrbear maddog that will not start unless it gets a long full start for about 9 or ten seconds on a car i have been stranded by it twice and would like some help finding why it takes that long to start sucking gass... Once it runs u rev and hold it about 7 seconds and no more issue till u turn it off then u have to go thru that again to get it to start... Once running its verry irradic too revs going everywhere... Also it wont idle unless its idling high as almost to creeping speed then its fine
|
|
New Rider
Currently Offline
Posts: 8
Likes: 0
Joined: Dec 19, 2014 20:02:59 GMT -5
|
Post by isaacbaker64 on Jun 9, 2015 18:54:29 GMT -5
yea its a clearcoated sticker just sand down and it will comw while sanding i did this to my peacesport 50
|
|
New Rider
Currently Offline
Posts: 8
Likes: 0
Joined: Dec 19, 2014 20:02:59 GMT -5
|
Post by isaacbaker64 on Jan 14, 2015 7:49:23 GMT -5
got a 50cc to 100bbk peace sports with a q4004 quantum amp in it speakers are mounted in little glove box"hole". on a fresh charge my shorai 12v 9ah battery will start it 1ce or 2times after that maybe 3 if its feeling like it but no more. my goal is atleast a month of use. i have a 2nd lead acid 12v 5ah that i could inline .i know its better to seperate them but i dont want to always have to be charging the little guy to use my speakers plus id have to put in a switch and its already run with the remote wire to my ignition ....scooter on amp on scooter off amp off any help would be lovely
|
|
New Rider
Currently Offline
Posts: 8
Likes: 0
Joined: Dec 19, 2014 20:02:59 GMT -5
|
Post by isaacbaker64 on Dec 25, 2014 19:47:13 GMT -5
the 150 cover will it fit a 50 longcase? if so i want it as a accessory to mine switchem out week to week
|
|