|
|
Post by skuttadawg on Sept 11, 2013 0:47:25 GMT -5
|
|
|
|
Post by RapidJim on Sept 11, 2013 11:03:53 GMT -5
I have sold a few of those and the customers love them Looks like I may have to lower my price a bit  |
|
New Rider
Currently Offline
Posts: 8 
Likes: 0
Joined: Dec 19, 2014 20:02:59 GMT -5
|
Post by isaacbaker64 on Jun 29, 2016 23:16:07 GMT -5
Alrighty prollybwrong place for this. my name is isaac i live in brunswick ga i bought a icrbear maddog that will not start unless it gets a long full start for about 9 or ten seconds on a car i have been stranded by it twice and would like some help finding why it takes that long to start sucking gass... Once it runs u rev and hold it about 7 seconds and no more issue till u turn it off then u have to go thru that again to get it to start... Once running its verry irradic too revs going everywhere... Also it wont idle unless its idling high as almost to creeping speed then its fine
|
|
|
|
Post by JerryScript on Jun 30, 2016 15:27:26 GMT -5
Check your valve lash, and check for any leaks in the air system.
|
|
|
|
Post by cyborg55 on Jul 1, 2016 8:29:03 GMT -5
Bingo,,the valve clearences I would think
|
|
New Rider
Currently Offline
Posts: 8
Likes: 0
Joined: Dec 19, 2014 20:02:59 GMT -5
|
Post by isaacbaker64 on Jul 21, 2016 14:11:24 GMT -5
Found it during the rain its a vaccumw leak in the case prollyvnothing i can do also i do think valves are off atad... Y does it need 7turns out on carb to run tho and a fuel pump to stay running
|
|
|
|
Post by JerryScript on Jul 22, 2016 23:11:19 GMT -5
The 7 turns out means you have too much air getting in. That means either it is a very bad leak, or the stock airbox has been replaced with a more free flow air filter, without upjetting to compensate.
|
|
New Rider
Currently Offline
Posts: 8
Likes: 0
Joined: Dec 19, 2014 20:02:59 GMT -5
|
Post by isaacbaker64 on Jul 27, 2016 23:23:12 GMT -5
Wonder if the intake manifold is split as it not idling is identical to my Taotao50 that just was fixed with that issue
|
|
Currently Offline
Posts: 0
Likes:
Joined: Nov 21, 2024 13:36:47 GMT -5
|
Post by Deleted on Aug 4, 2016 10:46:28 GMT -5
Had a similar problem, hard starts when cold, erratic idle etc, vacuum line was old and brittle got a crack and leaked at the intake fitting too, replaced it and pretty much everything resolved itself.
|
|
