|
|
Post by tvnacman on Jul 27, 2015 18:00:44 GMT -5
Nope... It really looks like someone put it their intentionally. This thing has less than 300 miles on it. Other than that it's clear and not brown like the oil I drained from the engine. I've never heard of an oiled cooled radiator either, that's why I'm confused and want to know. They do make oil coolers, this was before you posted pictures. good luck cleaning it out. John |
|
|
|
Post by tvnacman on Jul 27, 2015 17:56:03 GMT -5
lain The puller I linked you to from harbor freight, I used that puller with longer bolts and fender washers. Thread the longer bolts into the screw hole for the fan. Then work the center bolt into the crank and it pops off. The 3 jaw puller is very stress full on the flywheel. If it breaks the hub from the flywheel may give you big problems getting it off.  
|
|
|
|
Post by tvnacman on Jul 27, 2015 17:00:08 GMT -5
Gee Lain you seem to have it for me, I'll get a picture of the puller using the ban bolt holes. While you get the picture of the cvt sensor.
John
|
|
|
|
Post by tvnacman on Jul 27, 2015 16:30:52 GMT -5
do you have water in the oil?
John
|
|
|
|
Post by tvnacman on Jul 27, 2015 15:42:46 GMT -5
can we see a picture of the right side of the engine.
|
|
|
|
Post by tvnacman on Jul 27, 2015 13:55:36 GMT -5
Really wish people read instead of skimming. Thanks but as I said I have flywheel pullers but the flywheel was stripped by previous owner. Gonna try a claw puller tool. so the threads in the center are striped and the threads for the fan are striped too, how dooes the fan stay on? |
|
|
|
Post by tvnacman on Jul 27, 2015 13:08:30 GMT -5
|
|
|
|
Post by tvnacman on Jul 26, 2015 18:00:23 GMT -5
what does is look like?
|
|
|
|
Post by tvnacman on Jul 26, 2015 15:35:07 GMT -5
what about from the engine to the frame , then back to the battery?
|
|
|
|
Post by tvnacman on Jul 26, 2015 14:26:23 GMT -5
somehow attached to the kickstand.
|
|
|
|
Post by tvnacman on Jul 26, 2015 13:56:27 GMT -5
can we see what you did to make the wires better?
John
|
|
|
|
Post by tvnacman on Jul 26, 2015 13:31:45 GMT -5
that starter was dragging, poor or under sized wire or weak battery.
John
|
|
|
|
Post by tvnacman on Jul 26, 2015 13:25:46 GMT -5
take some pictures so we can see what your talking about.
|
|
|
|
Post by tvnacman on Jul 26, 2015 7:50:30 GMT -5
Maybe it's an oil cooler
|
|
|
|
Post by tvnacman on Jul 26, 2015 7:48:52 GMT -5
Wondering why? I used to be able to start the unit right from the start button but now that does not happen and I have to move the kick stand several times before it will kick over and start right. It probably has something to due with grounding?? any ideas ?? There is a kickstand cutoff switch, that sounds like it is acting funny. John |
|
