|
|
Post by bille on May 31, 2014 12:12:05 GMT -5
It's so beautiful out today I wish this stupid thing worked.
|
|
|
|
Post by bille on May 31, 2014 11:29:11 GMT -5
New belt is here and I just installed it but something is wrong. Please see the video:
|
|
|
|
Post by bille on May 31, 2014 9:15:41 GMT -5
Ok, tracking info shows that the belt is coming today. I might be able to ride this weekend!!!
|
|
|
|
Post by bille on May 30, 2014 19:51:16 GMT -5
The rear wheel isn't spinning because I don't have a belt or clutch on it right now. I ordered a larger belt and I'm waiting for it to come in the mail.
|
|
|
|
Post by bille on May 30, 2014 19:31:23 GMT -5
Check this out:
|
|
|
|
Post by bille on May 30, 2014 19:19:08 GMT -5
I changed the spark plug and now it runs better, but it doesn't like to be below 1600 rpm. I gave it a rest and now I'm going out to record a quick video of it running to show you.
|
|
|
|
Post by bille on May 30, 2014 18:21:18 GMT -5
I can get it running for like 1 or 2 minutes at a time but it's hard to start and always stalls around 1600 rpm
|
|
|
|
Post by bille on May 30, 2014 12:27:11 GMT -5
I got it running. It idled at 2800 rpm and I very slowly tried to bring it down by adjusting the idle screw. I got to about 1700 and it stalled and now won't start. I'm worried the new belt won't be the end of this  |
|
|
|
Post by bille on May 30, 2014 11:48:31 GMT -5
Should I be able to start the scooter with the clutch and belt off? I've been trying with no luck...
|
|
|
|
Post by bille on May 27, 2014 21:13:39 GMT -5
While I wait for the new belt to come I went ahead and removed the one old and I got the clutch off and made a short video of it. I don't see any weights or springs.
|
|
|
|
Post by bille on May 27, 2014 12:51:42 GMT -5
I picked up the impact wrench. The 842 20 30 belt is scheduled to be delivered on June 2. Will update again when I have it.
|
|
|
|
Post by bille on May 26, 2014 8:10:20 GMT -5
ok, the harbor freight here is closed till tomorrow but I will pick it up tomorrow.
There is a cycle place hear my house that sells scooters, they don't sell or work on scooters from china but I'm hoping the belt is a normal size and they might carry it. If so I will pick up everything tomorrow.
|
|
|
|
Post by bille on May 25, 2014 13:32:41 GMT -5
Because of the holiday weekend, I won't be able to get a new belt until next week sometime.
|
|
|
|
Post by bille on May 25, 2014 9:33:47 GMT -5
I'm looking for a 842 20 30 now and will update when I have a new belt. I will prob just cut the old belt off, which seems like a shame since its brand-new.
|
|
|
|
Post by bille on May 24, 2014 20:23:08 GMT -5
I did exactly what they did in the video but I can't get it off. I wonder if that means the belt they put on it when they built it is too small?
|
|
