|
|
Post by cyborg on Dec 22, 2015 0:18:56 GMT -5
Pasta salad
|
|
|
|
Post by cyborg on Dec 21, 2015 23:39:56 GMT -5
Yeah baby!!!!!!! That's how it's done!!!! Good on ya laddie!!!!!!
|
|
|
|
Post by cyborg on Dec 21, 2015 22:40:39 GMT -5
Contact Jim at rapid repair ,,,he is the resident ice bear guru,,,,he will help,,,,I've seen him help people in need of parts when it looks bleak
|
|
|
|
Post by cyborg on Dec 21, 2015 22:06:30 GMT -5
Elbow macaroni
|
|
|
|
Post by cyborg on Dec 21, 2015 22:05:15 GMT -5
Good hunting
|
|
|
|
Post by cyborg on Dec 21, 2015 9:26:30 GMT -5
I like it better for $5-600,,,,but if it's super clean and runs well,,,,,but I'd give it the real long look to make sure everything is kosher,,,no oil leaks ,,,lites work brakes the whole thing,,,
|
|
|
|
Post by cyborg on Dec 20, 2015 8:22:26 GMT -5
Eye bolt
|
|
|
|
Post by cyborg on Dec 20, 2015 0:14:22 GMT -5
Painted lady
|
|
|
|
Post by cyborg on Dec 18, 2015 21:17:12 GMT -5
Enough said
|
|
|
|
Post by cyborg on Dec 17, 2015 22:09:48 GMT -5
I see that coming off in a crash,,,,it may not make dot certs
|
|
|
|
Post by cyborg on Dec 17, 2015 22:03:40 GMT -5
One love
|
|
|
|
Post by cyborg on Dec 17, 2015 10:24:33 GMT -5
What's the difference between an a$$kisser & a brown noser? ,,,,,,,,,, depth perception
|
|
|
|
Post by cyborg on Dec 17, 2015 9:57:11 GMT -5
I rest my case
|
|
|
|
Post by cyborg on Dec 17, 2015 9:56:39 GMT -5
Having a looks at some of the Off the Shelf Aftermarket I don't see too much problem at all Raising the RPM Limit a few Thousand RPM. Given Correct Valve Springs and a Cam that Made Power to that Newer Limit. There Plenty of Material on the Taida Pistons to run over 10K. Here is Both a Cast and Forged 61mm, Neither Piston will Break at 10,500. Disregard the NCY on the Right.  Heres a Stroker Crank. I Did check this on the Truing stand and is under .001 run-out. The Rod IsMore than Adequate Material on Both the Big and Small Ends. Could Weld the Crank upon if it made ya Feel Better. I may do a few things in that area. lighten or forth   Taida Forging on Stroker Crank. Plenty of Material on the Bottom side of the Pin Bore  Taking a Hard look at these Hard Parts. Now at the RPM stuff being said I like My GY-6 Sweet Spot to be 6,400-7,200 |
|
|
|
two word game
by: cyborg - Dec 17, 2015 9:49:44 GMT -5
via mobile
Post by cyborg on Dec 17, 2015 9:49:44 GMT -5
Skin flint
|
|
