|
|
Post by millsc on Mar 20, 2016 11:24:24 GMT -5
I started back up my repair and scooter upgrade side job and my first three big jobs are stroker projects. Three guys all friends bought ncy 52mm bbk's and hoca strokers ill be installing them this weekend ill put up pics.
|
|
|
|
Post by JerryScript on Mar 21, 2016 14:30:47 GMT -5
Yummy, that's the kind of project you can really sink your teeth into.
|
|
Freshman Rider
Currently Offline
Posts: 81 
Likes: 18
Joined: Nov 24, 2014 16:12:53 GMT -5
|
Post by scoot08 on Mar 21, 2016 15:01:39 GMT -5
I'm planing to do a stroker/bbk too,on a 150 look forward to your info.and pic's
|
|
|
|
Post by millsc on Mar 21, 2016 19:39:38 GMT -5
Doing one this weekend ill take pics
|
|
|
|
Post by millsc on Mar 24, 2016 0:07:26 GMT -5
Got the stroker fitted and ncy cylinder kit on only needed one gasket not sure why, i had to use a spacer on my 150
|
|
|
|
Post by pistonguy on Mar 24, 2016 17:17:30 GMT -5
Got the stroker fitted and ncy cylinder kit on only needed one gasket not sure why, i had to use a spacer on my 150 so yo achieved zero deck with what thickness gasket? with no gasket how much was the piston coming out of the hole? |
|
|
|
Post by millsc on Mar 24, 2016 19:43:20 GMT -5
It was flush without a gasket just used one
|
|
|
|
Post by millsc on Mar 24, 2016 19:47:48 GMT -5
|
|
|
|
Post by millsc on Mar 24, 2016 19:48:54 GMT -5
|
|
|
|
Post by millsc on Mar 24, 2016 19:51:17 GMT -5
It was fairly simple no gear to press out like in the 150 no extra gaskets spacers or anything
|
|
|
|
Post by millsc on Mar 24, 2016 20:02:40 GMT -5
 Bigger pic |
|
