New Rider
Currently Offline
Posts: 32 
Likes: 0
Joined: Jul 19, 2015 2:06:34 GMT -5
|
Post by jkeney on Jul 19, 2015 2:21:44 GMT -5
Hello, my name is james. I have just entered the scooter wrenching world due to my most recent purchase. A 2006 verucci avispa50 sport r. Figured I should at least do this introduction, as I am certain I will be pretty active on this forum. I look forward to picking your brains. Thanks in advance.  |
|
|
|
Post by spandi on Jul 19, 2015 3:17:19 GMT -5
Hello and welcome to our "clubhouse" if you need help and answers to wrenching problems, this is the place for DIY advice and info.  |
|
|
|
Post by JoeyBee on Jul 19, 2015 6:06:58 GMT -5
Welcome to the forum!
Don't forget about the Tech Library we have here. It has a lot of very useful and good information.
|
|
New Rider
Currently Offline
Posts: 32
Likes: 0
Joined: Jul 19, 2015 2:06:34 GMT -5
|
Post by jkeney on Jul 19, 2015 9:15:04 GMT -5
Thank you.
|
|
|
|
Post by crawford on Jul 19, 2015 15:23:27 GMT -5
Glad to have you on board happy scooting
|
|
New Rider
Currently Offline
Posts: 32
Likes: 0
Joined: Jul 19, 2015 2:06:34 GMT -5
|
Post by jkeney on Jul 25, 2015 13:11:46 GMT -5
So I found that the carb diaphragm was assembled incorrectly and that the bowl is full of gummy fuel residue. Now I am just waiting on shroud, cdi, coil, plug, battery, uni filter, #  jet, belt, gasket set, manifold. wish me luck... |
|
New Rider
Currently Offline
Posts: 32
Likes: 0
Joined: Jul 19, 2015 2:06:34 GMT -5
|
Post by jkeney on Jul 25, 2015 13:12:36 GMT -5
Did I make the correct jet choice for the uni?
|
|
jet, belt, gasket set, manifold.