|
|
Post by florida on Jun 26, 2015 18:42:40 GMT -5
I dont have money for gasket sealant. I do have some black permatex silicone automotive adhesive.
I just removed the Pair system and cut outta some sheet metal a blocking plate for the hole on the block. I need to use a sealant to seal it.
Will what i have work?
|
|
|
|
Post by toddmaples on Jun 26, 2015 18:51:20 GMT -5
I dont have money for gasket sealant. I do have some black permatex silicone automotive adhesive. I just removed the Pair system and cut outta some sheet metal a blocking plate for the hole on the block. I need to use a sealant to seal it. Will what i have work? No. It will not stand up to the temperature of hot exhaust gasses. as long as the sheet metal is flat it should mate up good enough to seal, or use the old PAIR system gasket. |
|
|
|
Post by geh3333 on Jun 26, 2015 18:58:54 GMT -5
You need then red rtv gasket maker.
|
|
|
|
Post by rcq92130 on Jun 26, 2015 19:09:48 GMT -5
I dont have money for gasket sealant. I do have some black permatex silicone automotive adhesive. I just removed the Pair system and cut outta some sheet metal a blocking plate for the hole on the block. I need to use a sealant to seal it. Will what i have work? I have an NCY plate (presuming you are speaking about the 2-bolt opening in the valve cover) that I no longer need. Let me know; if you want it I'll try to find the thing. You will still need to cut out a gsket to go between it and the valve cover. |
|
|
|
Post by florida on Jun 26, 2015 21:14:21 GMT -5
Ok, thx for all the answers.
Poster above me, no thank you, i need to spend the postage money on other things.
|
|
|
|
Post by geh3333 on Jun 26, 2015 21:25:39 GMT -5
Ok, thx for all the answers. Poster above me, no thank you, i need to spend the postage money on other things. Rcq is a really good guy. I'm sure he can send it to you with free shipping. It should only cost the price of a stamp. |
|
|
|
Post by florida on Jun 27, 2015 14:18:28 GMT -5
Ok, thx for all the answers. Poster above me, no thank you, i need to spend the postage money on other things. Rcq is a really good guy. I'm sure he can send it to you with free shipping. It should only cost the price of a stamp. Ok! I'll pm him with my address. |
|
|
|
Post by rcq92130 on Jun 28, 2015 14:13:10 GMT -5
Rcq is a really good guy. I'm sure he can send it to you with free shipping. It should only cost the price of a stamp. Ok! I'll pm him with my address. Was just about to give up - had looked thru all the scooter parts i had -- and then on the very last cylinder head was that little NCY plate! In an envelope and will be on the way to you tomorrow (from san diego). If you spend 35 cents postage to return to me 35 cents for postage I'll be deeply offended ! Glad to help. ps: the gasket that goes between the NCY plate and the head came off pretty intact, but i still strongly urge you put a thin coat of gasket sealant (not Permatex) on the thing so you don't end up doing the job over. |
|
|
|
Post by florida on Jun 30, 2015 12:45:11 GMT -5
Ok! I'll pm him with my address. Was just about to give up - had looked thru all the scooter parts i had -- and then on the very last cylinder head was that little NCY plate! In an envelope and will be on the way to you tomorrow (from san diego). If you spend 35 cents postage to return to me 35 cents for postage I'll be deeply offended ! Glad to help. ps: the gasket that goes between the NCY plate and the head came off pretty intact, but i still strongly urge you put a thin coat of gasket sealant (not Permatex) on the thing so you don't end up doing the job over. Thank you so much. |
|
