Don't buy the 143cc big bore kit for yamaha vino 125cc  By  tkrocks2 (Read 7,473 times)

I got everything expect for this THEN Come here to your THREAD ON DOC.

His profile shows he leaves a confrontational response to every negative or neutral feedback. Like every negative reviewer snuck into his back yard and left a dook in his lawn, then smashed all of his gnomes on the way out. I might have to take a look at seller's responses in the future.

Can you dispute this somehow for a refund?

Sent from my TotoTV Stick using Tapatalk

Performance parts as electrical there is no guarantee, also if it is not put in by a professional mechanic it always goes with the seller.
If a none professional puts something in Odds are he messed up and did not do something right. I would also bet that 99% of the folks do not have a TORQUE wrench and or the right tools.
Alleyoop

I would not be so upset if the seller just worked with me he did not even try to work things out at all the minute I told him something was wrong he got all defenceive thers nothing wrong with the kit I sent you the piston rings are fine you failed on install.

But how can you tell that the piston rings are good unless you take them out of the package and put them in the cylinder and use a feeler gauge to check to make sure there is a good size gap when compressed not very little to no gap at all or how can you tell if the oil ring is to small unless you put it on the piston you can't tell just by looking at a package and say those are good just because something is new dose not mean it's not defective.

I justt bought this BBK with the high cam. Just wondering what is the proper clearance for the vavle and rings. I also bought a Keihin PE28mm. what would you suggest for jetting. Also installing a NCY exhaust and performance filter

www.jiangwayne.com/scooter/p_i.php?i=7

I fiqured out what the problem was at first I thought it was the rings but I took a stright edge to the top of the cylinder and the top of the cyclinder is not level you can see light on the timeing chain side of the cylinder so it was letting the oil seep through that I tried leveling it out as best I could and tried blocking it out but it still shows light.

I tried to contact the seller both before and after the install I never heared back from him for almost a month so I left him negitive feed back then with in an hour he messaged me back and told me he dose not sell defective products witch clearly this is defective unless you love 2 strokes and you want to make your 4 stroke engine smoke like a 2 stroke.

I would not buy anything from this guy at all he has no customer skills he is fine when he sells you something but as soon as you find out theres something wrrong he goes nuts and is is always the buyers fault maybe he should look alittle more closely at what hes selling or he knows what he is selling is junk and tries to make it everybody elses fault but his.

There is another big bore kit for the vino 125 I forget what website I saw it on but it is a much better kit and if I rember right it was a bit cheaper to.

I have learned something from this when ever I buy anything now I look at the negtive feed back comments before I used to just check to see how much negtive feed back was there and not look at the coments I also ask as many annoying questions that I can even if I already know the answer to them just to see how good there customer service is or at least to see if they know what there selling.