New Rider
Currently Offline
Posts: 39
Likes: 1
Joined: Mar 13, 2013 11:36:18 GMT -5
|
Post by oldscoot50 on Sept 15, 2014 15:42:01 GMT -5
Can someone please tell me how and even if you have pics to show how...Need to replace blinker bulb on the rear of my Jonway....Thank you
|
|
|
|
Post by alleyoop on Sept 15, 2014 16:54:18 GMT -5
Open up the seat and there should be a panel at the rear held on with two usually plastic push in screws or actual screws. Take the screws out and the panel comes out to get at all the bulbs in the back. Alleyoop  |
|
|
|
Post by keikara on Sept 19, 2014 15:04:05 GMT -5
I know your is a 250 but I have the Jonway 150, if it is at all similar I have to actually start to take the side panels off, top piece under rack and a little piece above license plate light and then can just unclip light from the fixture to replace bulb.
|
|
|
|
Post by yelloscoot on Dec 26, 2015 17:44:14 GMT -5
Wow, cool. I just happened to have some spare 1156 and 1157 LEDs. So I changed those out on my new Jonway. Then I got to looking at the front lights, and, they are just as easy to get to.  Thanks Alleyoop |
|
..BAD TO THE BONE..
