|
Post by alleyoop on Aug 16, 2014 18:12:35 GMT -5
No the actual case of the motor where the JUG has to fit into the case of the motor: See this they call that a jug and it fits inside the two half's of the motor. so the casing hole has to be bored out so the JUG slips down into it.
|
|
|
Post by ksaun123 on Aug 16, 2014 20:56:02 GMT -5
Im taking donations
|
|
|
Post by geh3333 on Aug 16, 2014 22:56:28 GMT -5
|
|
|
Post by ksaun123 on Aug 17, 2014 2:59:34 GMT -5
Those kits look good but im using non-emission config
|
|
|
Post by geh3333 on Aug 17, 2014 17:30:22 GMT -5
You don't use the emissions with these kits either . If you are concerned about the head many heads come with the emissions cast into it but the holes are not drilled out. Just like my ncy racing head .
|
|