|
|
Post by prodigit on Mar 23, 2013 14:17:57 GMT -5
I never had any problems with my stock belts.
However I noticed that saving money on a belt, especially when you performance tune it, is worthless.
Those cheaper belts are probably good for people who have a poor performing 50cc from the pre-2008 era.
|
|
Currently Offline
Posts: 0
Likes:
Joined: Nov 21, 2024 12:31:57 GMT -5
|
Post by Deleted on Mar 24, 2013 0:37:47 GMT -5
If you are also using an aftermarket "performance" variator it might be pushing your belt into the starter bendix under deceleration. If that's the case the belt will break regardless in short time. I bought an NCY "Golden" variator with a performance pitch, and it cost me more in belts than it was worth. I did run it for a while and just took the bendix out and kicked it over, but the kick starters aren't meant to be used all the time and ended up pitching the variator and went stock.
|
|
|
|
Post by skuttadawg on Mar 24, 2013 0:56:52 GMT -5
Bummer MillSC I know it sucks to push . I prefer Bando belts myself but Gates is almost just as good
|
|
Currently Offline
Posts: 0
Likes:
Joined: Nov 21, 2024 12:31:57 GMT -5
|
Post by Deleted on Mar 24, 2013 1:32:08 GMT -5
|
|
|
|
Post by millsc on Mar 24, 2013 8:08:29 GMT -5
I use a performance variator on both scoots, never had an issue on my tapout scoot, but it has a gates premium belt
|
|
Freshman Rider
Currently Offline
Posts: 56
Likes: 2
Joined: May 14, 2013 22:50:01 GMT -5
|
Post by chihuahuas on Mar 24, 2013 10:00:47 GMT -5
Napa has the Gates belts , They have them in a Napa Label.
139qmb Shortcase
Gates standard PL20507 $19 Napa part no PL20507
Gates Kevlar PL30707 $39 Napa Part no PL30507
Makes it convenient to get one on short notice.
I like to run 2 belts
1 a Gates and 1 is a Bando, I run one for a few months and switch to the other for a few months. Like shoes, I wear one for a while and switch to the other. Takes forever to wear them both out.
|
|
