New Rider
Currently Offline
Posts: 25
Likes: 0
Joined: Aug 8, 2013 10:42:35 GMT -5
|
Post by chewydbb42091 on Sept 25, 2013 15:49:19 GMT -5
is there any way to remove a crankshaft main bearing, the one that sits in the case side. i have a doner motor from an 89 honda elite 250cc for my qlink safero i thnk its called. the motors are the same cause my crankshaft is seized and it was cheaper to get a doner scoot then to buy a new crankshaft. any input at all?
please let me know i can be on here or just simply text me
904-576-6368 thanks so much
|
|
|
|
Post by alleyoop on Sept 25, 2013 16:14:53 GMT -5
Here this should help:
Alleyoop
|
|
New Rider
Currently Offline
Posts: 25
Likes: 0
Joined: Aug 8, 2013 10:42:35 GMT -5
|
Post by chewydbb42091 on Sept 25, 2013 17:08:49 GMT -5
my bearing is stuck on te crank end and i need help gettin that off ...i wish it was in the crank end
|
|
|
|
Post by alleyoop on Sept 25, 2013 17:23:00 GMT -5
Then you need a bearing puller, ones like they have that slip behind the bearing, or you can try one with the 3 arms that grab just part of the bearing on the edge. Alleyoop  Check the pullers out: www.amazon.com/b?ie=UTF8&node=15708861 |
|
New Rider
Currently Offline
Posts: 25
Likes: 0
Joined: Aug 8, 2013 10:42:35 GMT -5
|
Post by chewydbb42091 on Sept 25, 2013 17:37:41 GMT -5
the picture you posted still looks nothing like what im talkin about think you can shoot me a text ill send you a clear picture of my issue my number is in the first post
|
|
New Rider
Currently Offline
Posts: 25
Likes: 0
Joined: Aug 8, 2013 10:42:35 GMT -5
|
Post by chewydbb42091 on Sept 26, 2013 7:46:25 GMT -5
thank you for the no further help assholes, i will no longer be using this god dam fourm
|
|
|
|
Post by sailracer on Sept 26, 2013 9:03:53 GMT -5
WOW!!! What's that all about??You do realize this is a global forum, and covers a lot of different time zones don't you? sometimes you have to wait a day or two.
|
|
Sophomore Rider
Currently Offline
Posts: 211
Likes: 1
Joined: Aug 7, 2013 1:36:49 GMT -5
|
Post by f4milytime on Sept 26, 2013 13:00:26 GMT -5
Whats with the Hostility !!! This is a really helpful forum, with some really cool members, you should stick around.
|
|
|
|
Post by alleyoop on Sept 26, 2013 13:04:13 GMT -5
He is young and does not know any better. We have our own life's to live and come on the forums when we have some time to help out. I gave him a link to many types of pullers he should be able to figure out which one he needs to pull the bearing off his crank shaft.
CHEWY,
If YOU STILL NEED HELP Post the picture of the problem child bearing here so we all can see why you cannot figure out how to take the bearing off. The other problem will be putting on a new bearing without damaging it.
Alleyoop
|
|
|
|
Post by RapidJim on Sept 26, 2013 13:07:58 GMT -5
is there any way to remove a crankshaft main bearing, the one that sits in the case side. i have a doner motor from an 89 honda elite 250cc for my qlink safero i thnk its called. the motors are the same cause my crankshaft is seized and it was cheaper to get a doner scoot then to buy a new crankshaft. any input at all? please let me know i can be on here or just simply text me 904-576-6368 thanks so much You asked for help you got help,. the picture you posted still looks nothing like what im talkin about think you can shoot me a text ill send you a clear picture of my issue my number is in the first post Maybe you should have posted a picture here to clarify what you have. thank you for the no further help assholes, i will no longer be using this god dam fourm Your welcome. You have to realize that 14 hours may not be enough time to get a response back. No need to be so hostile. If you use that attitude, your posts will most likely stay unanswered, whether here or else where. Have a Nice Day |
|
|
|
Post by wilds on Sept 26, 2013 15:28:45 GMT -5
DX
|
|
..BAD TO THE BONE..
jet
