|
|
Post by doublert on Sept 18, 2013 0:33:16 GMT -5
Ok, my brother did a bbk on his 50 vip, now I'm ready to cook up something for my Peace 150 dash (like vip). Here is whats on my list so far: Taida 61mm bbk forged piston, Taida 63mm head, Taida 6mm stroke crankshaft kit, A-10 Cam. I guess that's about it so far. I'm gonna order my stuff from ScooterElements, Walt seems to be a nice guy, and helps everyone out here so....anything else that I need to go on my list? Wonder what kind of differences I'll notice?
Thanks everyone,
Randy
|
|
|
|
Post by millsc on Sept 18, 2013 8:27:33 GMT -5
get a few extra base gaskets for the stroker crank
|
|
|
|
Post by doublert on Sept 18, 2013 17:46:52 GMT -5
get a few extra base gaskets for the stroker crank I'm getting the 6mm stroker crank kit from ScooterElements, it says that it comes with cylinder spacer? Does that mean that I'll need more base gaskets? |
|
|
|
Post by millsc on Sept 18, 2013 18:49:37 GMT -5
You may be ok with the spacer just look at the piston in the jug at tdc you will be able to tell if you need more clearance
|
|
New Rider
Currently Offline
now got my pic on here
Posts: 26
Likes: 0
Joined: Apr 11, 2013 16:24:08 GMT -5
|
Post by twinpower on Sept 18, 2013 23:46:01 GMT -5
I would get a performance free flowing exhaust some jets for the carb and possibly a performance air filter if you don't want to modify your air box.. just my (o)
|
|
|
|
Post by millsc on Sept 18, 2013 23:48:25 GMT -5
looks like he has all the other mods to compliment the bbk, it should be a good build
|
|
|
|
Post by millsc on Sept 18, 2013 23:51:40 GMT -5
I'm an in town rider and the mods i did made my scoot much faster, but it was unnecessary would of been fine stock, the 150cc is perfect for in town and back highways, but in 70 zones its a no go, i think i could ride the roads on the 70 zones but would have it maxed which is bad for the motor
|
|
|
|
Post by doublert on Sept 19, 2013 12:36:23 GMT -5
looks like he has all the other mods to compliment the bbk, it should be a good build Yea, I have the Two Bros. Exhaust, and pod filter with K&N. I think I have the stock jet in the carb now, but I do have a 112.5 jet to put in it still...... |
|
|
|
Post by doublert on Sept 19, 2013 12:40:05 GMT -5
[replyingto=doublert]doublert[/replyingto]Would the Taida 63mm head on scooterelements be a good head to go with? Or the big valve head from scrappys? I just want the best to go with.
|
|
